OK, I found a Windows based VPN server at work (we have one windows + 2 cisco)
I figured I'd try that because it was the least painful to setup elsewhere (meaning fewer things that vary in configuration?), and I found *some* references to connecting to it. http://lists.freebsd.org/pipermail/freebsd-net/2006-June/010891.html Here are my files. Anything in ALL CAPS is a replacement for some information I'd rather not display publically. /usr/local/etc/mpd/mpd.conf ======================================== vpn: new -i nve0 vpn vpn set iface session 28800 set bundle authname "WORK-DOMAIN\\WORK-USERNAME" set bundle enable compression set ccp yes mppc set ccp yes mpp-e40 set ccp yes mpp-e56 set ccp yes mpp-e128 # set this to your correct routing information set iface route EXTERNAL-WORK-VPN-IP/24 set link enable no-orig-auth open ======================================== /usr/local/etc/mpd/mpd.secret ======================================== WORK-DOMAIN\\WORK-USERNAME WORK-PASSWORD ======================================== /usr/local/etc/mpd/mpd.secret ======================================== vpn: set link type pptp # set pptp self 1.2.3.4 set pptp peer EXTERNAL-WORK-VPN-IP set pptp enable originate outcall ======================================== [EMAIL PROTECTED] 08:12:45 (1) /usr/local/etc/mpd > sudo mpd ======================================== Multi-link PPP for FreeBSD, by Archie L. Cobbs. Based on iij-ppp, by Toshiharu OHNO. mpd: pid 91637, version 3.18 ([EMAIL PROTECTED] 22:07 19-Apr-2007) [vpn] interface "nve0" is not a netgraph interface [vpn] netgraph initialization failed mpd: no bundles defined mpd: no bundles defined mpd: no bundles defined mpd: no bundles defined mpd: no bundles defined mpd: no bundles defined mpd: no bundles defined mpd: no bundles defined mpd: no bundles defined mpd: no bundles defined [:] ======================================== Here's a point of confusion for me (I tested all using ipconfig): (1) My machine at work is a windows machine, ip config reports a netmask of 255.255.254.0 (2) The machine I admin is also windows, with 255.255.255.0 as it's netmask (3) My windows desktop, when VPNing in has a netmask of 255.255.255.255 for the VPN interface. Any suggestions on how to get this up? This is one of only two tasks I need to boot into windows (at home) to accomplish currently, and I'd like to rectify that. It looks like I need to make a netgraph bridge, but I don't know where to start looking for that one. Netgraph(4) wasn't enlightening for me. The ipsec section of the handbook left me more confused then I was when I started. Thanks, -Jim Stapleton _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "[EMAIL PROTECTED]"
