Brian, Very helpful. Someone on another forum suggsted the possibility of adjusting routing using either a routed daemon or setting static routes, but it seems that your method seems quicker. If I segment off the PPP side, do I need to change the subnet mask on the rest of the network as well?
(I should know this!) -- Chris > The issue is that 192.168.1.0/24 machines have to know to route > 192.168.2.0/24 stuff through 192.168.1.230, or else the timeclock > machine needs some sort of presence on 192.168.1.0/24. > > This can be done by allocating a segment of 192.168.1.0/24 to the ppp > client and adding ``enable proxyall'' to the ppp server config. > > server: > enable proxyall > set ifaddr 192.168.1.230 192.168.1.232/30 > > client: > set ifaddr 192.168.1.233 192.168.1.230 > > and then setting the addresses on the crossover cable to 192.168.1.233 > and 192.168.1.234. > > The ``enable proxyall'' bit tells ppp to create proxy arp entries for > all of 192.168.1.232/30 (except for .232 and .235), allowing everything > else on 192.168.1.0/24 to think it's talking directly to these machines. > > -- > Brian Somers <[EMAIL PROTECTED]> > Don't _EVER_ lose your sense of humour ! <[EMAIL PROTECTED]> > -- Chris Tusa [EMAIL PROTECTED] http://people.linisys.com/ctusa Buy books from my Half.com inventory: http://half.ebay.com/shops/shops.jsp?seller_id=1691584 _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "[EMAIL PROTECTED]"
