Thanks Again, Just a quick note on your last reply, don't know whether this will make an impact:
> I guess the missing bit is that the timeclock machine needs a special > routing table with 192.168.1.234/30 on it's crossed-over ethernet > interface and 192.168.1.233 as the default route, allowing data to > get back to the rest of the /24 subnet. The timeclock itself is a proprietary STANDALONE device, not an actual machine with an OS. It has its own configuration interface via its LCD screen and buttons. It only allows me to add the IP, Netmask & Gateway. So I probably can't perform routing table changes to that device. ( http://www.timeclockplus.com/products/hardware/markIII/mark3.aspx ) > When you get it all working it'll start to make sense (if it doesn't > already). I will try the configuration tommorrow and see what happens. Thanks so much. -- Chris Tusa [EMAIL PROTECTED] http://people.linisys.com/ctusa Buy books from my Half.com inventory: http://half.ebay.com/shops/shops.jsp?seller_id=1691584 _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "[EMAIL PROTECTED]"
