In case you still need this information.
John Mok:
Hi,
I would like to replace the existing Cisco router 1600 and connect to MCI Hong Kong with FeeBSD 5.3 box with a Digi SYNC 570 serial card. With reference of the FreeBSD handbook and the information from Julian Elischer at
http://www.elischer.org/netgraph/
I have compiled the kernel with the following options :-
.... options NETGRAPH options NETGRAPH_FRAME_RELAY options NETGRAPH_LMI .... device ar
The dmesg showed that the device ARNET/Digi SYNC/570i was loaded successfully. However, when I tried to config. with the following, the ngctl prompt with the error:
#ngctl mkpeer ar0: frame_relay rawdata downstream
#ngctl mkpeer ar0:rawdata lmi dlci500 ansi
ngctl mkpeer ar0:rawdata lmi dlci0 annexD
also you need NETGRAPH_RFC1490
ngctl mkpeer ar0:rawdata rfc1490 dlci500 downstream ngctl mkpeer ar0:rawdata.dlci500 iface inet inet
and you will get smth like ng0
Best regards, Roman Kurakin
ngctl: send msg: No such file or directory
I tried the testing with MCI connection disconnected. How do I set the line speed to 1536 Kbps? I hope someone could help me how to config. the netgraph with work with Digi SYNC/570i
Thanks a lot.
John Mok
_______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "[EMAIL PROTECTED]"
_______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "[EMAIL PROTECTED]"
