Brooks Davis wrote:
Hello!
I still don't see how this usefull differs from taking action or not
taking action.
Just more simple to understand (trusted or not trusted vlan (IMHO)), but
taking action via IPFW of course will be more flexible.
What Cisco does is of rather limited relevence IMO. The default case of
a FreeBSD system is not a bridge or router but a host. We need to
determine what makes sense for both the bridge/router case and the host
case. Cisco's are for all practical purposes, not hosts.
Thinking my idea satisfies router/bridge an host as well. We may set
value or may pass-trough it.
I've found at least one refrence when googling for 802.1p which says
that vlan 0 is reserved and means that the tag is only a priority. In
that case there is no vlan and I don't think vlan devices should be
involved. If they are, you must set the priority on every frame or
priority and non-priority frames will be delivered to different
intefaces which may or may not be what you want.
I'm not 100% sure that's correct, but the IEEE has made it practialy
impossiable to find 802.1p. I haven't found it yet.
Augh... it that case. Yes, VLID==0 is reserved for "priority" packets,
but it should not be used in usual way. And this packet will have full
802.1Q header indeed.
And what this changes? Some switches totally ignore 802.1p. We're
talking about IEEE standard and should fully support it. Also, may You
point me where You have read this?
The issue is that you may need the ability to treat some values as
though they are the same because some network environments will do this.
Don't think that. What to do with each value is our own decision and
only when we want to implement priority queues, in all other cases we
may just ignore it (this way FreeBSD currently does).
While I think a lower level solution will be the most useful in the
end, I don't object to an interface based solution. I think you should
proceed with that with the idea that you add a third, optional keyword
to vlan initalization to specify priority. That way you can create
seperate interfaces for each priority for any vlan tag. Something like:
ifconfig vlan create vlan 2 vlandev fxp0 vlanpri 3
But this is already done with my patch!!! :))) Have You seen it? I've
added also ability to set apropriate CFI. Attached patch again to this
message. Please review it again :)
-- Brooks
--
With respect,
Boris
--- sbin/ifconfig/ifconfig.h.orig Wed Jan 19 10:44:20 2005
+++ sbin/ifconfig/ifconfig.h Fri Jan 21 09:11:22 2005
@@ -49,6 +49,8 @@
extern void setvlantag(const char *, int, int, const struct afswtch *rafp);
extern void setvlandev(const char *, int, int, const struct afswtch *rafp);
+extern void setvlanpri(const char *, int, int, const struct afswtch *rafp);
+extern void setvlancfi(const char *, int, int, const struct afswtch *rafp);
extern void unsetvlandev(const char *, int, int, const struct afswtch *rafp);
extern void vlan_status(int s, struct rt_addrinfo *);
--- sbin/ifconfig/ifconfig.c.orig Wed Jan 19 10:56:44 2005
+++ sbin/ifconfig/ifconfig.c Fri Jan 21 09:11:54 2005
@@ -247,6 +247,8 @@
#endif
#ifdef USE_VLANS
{ "vlan", NEXTARG, setvlantag },
+ { "vlanpri", NEXTARG, setvlanpri },
+ { "vlancfi", NEXTARG, setvlancfi },
{ "vlandev", NEXTARG, setvlandev },
{ "-vlandev", NEXTARG, unsetvlandev },
#endif
--- sbin/ifconfig/ifvlan.c.orig Thu Apr 18 23:14:09 2002
+++ sbin/ifconfig/ifvlan.c Fri Jan 21 12:19:38 2005
@@ -59,6 +59,8 @@
"$FreeBSD: src/sbin/ifconfig/ifvlan.c,v 1.5 2002/04/18 17:14:09 imp Exp $";
#endif
static int __tag = 0;
+static int __pri = 0;
+static int __cfi = 0;
static int __have_tag = 0;
void
@@ -72,9 +74,10 @@
if (ioctl(s, SIOCGETVLAN, (caddr_t)&ifr) == -1)
return;
- printf("\tvlan: %d parent interface: %s\n",
- vreq.vlr_tag, vreq.vlr_parent[0] == '\0' ?
- "<none>" : vreq.vlr_parent);
+ printf("\tvlan: %d 802.1p: %d CFI: %d parent interface: %s \n",
+ EVL_VLANOFTAG(vreq.vlr_tag), EVL_PRIOFTAG(vreq.vlr_tag),
+ EVL_CFIOFTAG(vreq.vlr_tag),
+ vreq.vlr_parent[0] == '\0' ? "<none>" : vreq.vlr_parent );
return;
}
@@ -88,13 +91,66 @@
__tag = tag = atoi(val);
__have_tag = 1;
+ if(tag < 1 || tag > 4094)
+ errx(1, "VLAN ID shoud be in range 1..4094");
+
+ bzero((char *)&vreq, sizeof(struct vlanreq));
+ ifr.ifr_data = (caddr_t)&vreq;
+
+ if (ioctl(s, SIOCGETVLAN, (caddr_t)&ifr) == -1)
+ err(1, "SIOCGETVLAN");
+
+ vreq.vlr_tag = EVL_MAKETAG(tag, __pri, __cfi);
+
+ if (ioctl(s, SIOCSETVLAN, (caddr_t)&ifr) == -1)
+ err(1, "SIOCSETVLAN");
+
+ return;
+}
+
+void
+setvlanpri(const char *val, int d, int s, const struct afswtch *afp)
+{
+ u_int16_t pri;
+ struct vlanreq vreq;
+
+ __pri = pri = atoi(val);
+
+ if(pri > 7)
+ errx(1, "VLAN 802.1p shoud be in range 0..7");
+
+ bzero((char *)&vreq, sizeof(struct vlanreq));
+ ifr.ifr_data = (caddr_t)&vreq;
+
+ if (ioctl(s, SIOCGETVLAN, (caddr_t)&ifr) == -1)
+ err(1, "SIOCGETVLAN");
+
+ vreq.vlr_tag = EVL_MAKETAG(EVL_VLANOFTAG(vreq.vlr_tag), pri, __cfi);
+
+ if (ioctl(s, SIOCSETVLAN, (caddr_t)&ifr) == -1)
+ err(1, "SIOCSETVLAN");
+
+ return;
+}
+
+void
+setvlancfi(const char *val, int d, int s, const struct afswtch *afp)
+{
+ u_int16_t cfi;
+ struct vlanreq vreq;
+
+ __cfi = cfi = atoi(val);
+
+ if(cfi > 1)
+ errx(1, "VLAN CFI shoud be 0 or 1");
+
bzero((char *)&vreq, sizeof(struct vlanreq));
ifr.ifr_data = (caddr_t)&vreq;
if (ioctl(s, SIOCGETVLAN, (caddr_t)&ifr) == -1)
err(1, "SIOCGETVLAN");
- vreq.vlr_tag = tag;
+ vreq.vlr_tag = EVL_MAKETAG(EVL_VLANOFTAG(vreq.vlr_tag), __pri, cfi);
if (ioctl(s, SIOCSETVLAN, (caddr_t)&ifr) == -1)
err(1, "SIOCSETVLAN");
@@ -117,7 +173,7 @@
err(1, "SIOCGETVLAN");
strncpy(vreq.vlr_parent, val, sizeof(vreq.vlr_parent));
- vreq.vlr_tag = __tag;
+ vreq.vlr_tag = EVL_MAKETAG(__tag, __pri, __cfi);
if (ioctl(s, SIOCSETVLAN, (caddr_t)&ifr) == -1)
err(1, "SIOCSETVLAN");
--- sbin/ifconfig/ifconfig.8.orig Thu Sep 30 20:25:39 2004
+++ sbin/ifconfig/ifconfig.8 Fri Jan 21 09:39:24 2005
@@ -386,15 +386,35 @@
pseudo interface, set the VLAN tag value
to
.Ar vlan_tag .
-This value is a 16-bit number which is used to create an 802.1Q
+This value is a 12-bit number which is used to create an 802.1Q
VLAN header for packets sent from the
.Xr vlan 4
interface.
Note that
-.Cm vlan
+.Cm vlan, vlanpri, vlancfi
and
.Cm vlandev
-must both be set at the same time.
+must be set at the same time.
+.It Cm vlanpri Ar vlan_pri
+If the interface is a
+.Xr vlan 4
+pseudo interface, set the 802.1p priority value
+to
+.Ar vlan_pri .
+This value is a 3-bit number which is used to tag outgoing
+VLAN packtes with apropriate priority. If
+.Cm vlanpri
+is omitted it default to 0.
+.It Cm vlancfi Ar vlan_cfi
+If the interface is a
+.Xr vlan 4
+pseudo interface, set the CFI value
+to
+.Ar vlan_cfi .
+This value is a 1-bit number which is used to tag outgoing
+VLAN packtes with apropriate CFI value. If
+.Cm vlancfi
+is omitted it default to 0.
.It Cm vlandev Ar iface
If the interface is a
.Xr vlan 4
--- sys/net/if_vlan_var.h.orig Mon Jan 19 00:29:04 2004
+++ sys/net/if_vlan_var.h Fri Jan 21 09:46:46 2005
@@ -43,6 +43,8 @@
#define EVL_VLID_MASK 0x0FFF
#define EVL_VLANOFTAG(tag) ((tag) & EVL_VLID_MASK)
#define EVL_PRIOFTAG(tag) (((tag) >> 13) & 7)
+#define EVL_CFIOFTAG(tag) (((tag) >> 12) & 1)
+#define EVL_MAKETAG(vlid,pri,cfi) ((((((pri) & 7) << 1) | ((cfi) & 1))
<< 12) | ((vlid) & EVL_VLID_MASK))
/* sysctl(3) tags, for compatibility purposes */
#define VLANCTL_PROTO 1
@@ -52,8 +54,8 @@
* Configuration structure for SIOCSETVLAN and SIOCGETVLAN ioctls.
*/
struct vlanreq {
- char vlr_parent[IFNAMSIZ];
- u_short vlr_tag;
+ char vlr_parent[IFNAMSIZ];
+ u_int16_t vlr_tag;
};
#define SIOCSETVLAN SIOCSIFGENERIC
#define SIOCGETVLAN SIOCGIFGENERIC
--- sys/net/if_vlan.c.orig Wed Jan 19 10:40:32 2005
+++ sys/net/if_vlan.c Fri Jan 21 09:05:45 2005
@@ -930,15 +930,6 @@
error = ENOENT;
break;
}
- /*
- * Don't let the caller set up a VLAN tag with
- * anything except VLID bits.
- */
-
- if (vlr.vlr_tag & ~EVL_VLID_MASK) {
- error = EINVAL;
- break;
- }
VLAN_LOCK();
error = vlan_config(ifv, p);
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
