Here's my ppp.conf - the 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 are the actual values used in the file. They bear no relation to any IP addresses used in my network whatsoever. Why they work; the /0 says there are no significant bits. PPP is free to change to any required ip. The nat enable is used because the machine is used as a gateway. I've never had any trouble with this setup on any web site or any other operation. By the way, this conf file is used on a 4.5 system. The set MRU 1492 and set MTU 1492 were required because of the way verizon was set up. Good luck. Gene
------------------------- ppp.conf --------------------------------------- default: set device PPPoE:ed1 set MRU 1492 set MTU 1492 set speed sync set authname username (substitute your user name) set authkey password (substitute your PASSWORD) set log command set dial set redial 0 0 set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 add 0 0 HISADDR nat enable yes set cd 5 enable lqr enable proxy set crtscts off papchap: set authname username (substitute your user name) set authkey password (substitute your PASSWORD) ---------------------------------------------------------------------------------------- ------------ God's Blessings, Gene To everything there is a season, and a time to every purpose under heaven. Ecl 3:1 - and more recently, The Byrds To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-net" in the body of the message
