On Tue Aug 21, 2007 at 11:53:36 +0200, Mohacsi Janos wrote:
> Dear All,
> What is the recommended way to configure vlan interfaces on
> etherchannel bonded interfaces in
> a failure mode. I found, that etherchannel is supported by ng_fec(4) (but not
> exactly what I
> want) and also found that there two? way of configuring vlans: vlan(4) and
> ng_vlan(4). But I
> did not found any description or configuration snippet to configure both
> preferentially via
> /etc/rc.conf neither in FreeBSD 6.x-stable, neither in FreeBSD-7.0-current.
> What I want to
> achieve:
>
> [switch1]-----GE---bge0----\ /----vlan100
> }=={-----vlan101
> [switch2]-----FE---bge1----/ \----vlan102
> \---vlan103
>
>
> I would like to prefer all the vlans via bge0 with GE towards switch1. And
> use only bge1 in
> case of switch1 or bge0 link failure.
>
> I could use bond on Linux for this purpose. How to achieve similar setup?
>
> Best Regards,
>
> Janos Mohacsi
> Network Engineer, Research Associate, Head of Network Planning and Projects
> NIIF/HUNGARNET, HUNGARY
> Key 70EF9882: DEC2 C685 1ED4 C95A 145F 4300 6F64 7B00 70EF 9882
> _______________________________________________
> freebsd-hackers@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
> To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Probably net/ucarp?Cheers, Denis Barov
pgpVp0rZBE7OR.pgp
Description: PGP signature
