Heikki Turunen wrote: >> Ok, I am now about to upgrade. I can still not tell, from the >> hardware notes, whether 4.10R will actually support the VIA 8237 ATA >> 133 as well (it only talks about VIA 8237 SATA 150). I hope so. > > I'm using 4.10-STABLE and VIA 8237 works just fine. > > --------8<-------- > localhost/heikki:$ dmesg | grep atapci1 > atapci1: <VIA 8237 ATA133 controller> port 0x9000-0x900f irq 14 at > device 15.1 on pci0 > ata0: at 0x1f0 irq 14 on atapci1 > ata1: at 0x170 irq 15 on atapci1 > -------->8--------
I overcame my reluctance, upgraded to 4.10-RELEASE-p2, and now everything is working again! :) atapci1: <VIA 8237 SATA150 controller> port 0xd000-0xd0ff,0xd400-0xd40f,0xd800-0xd803,0xe000-0xe007,0xe400-0xe403,0xe800 -0xe807 irq 10 at device 15.0 on pci0 ata4: at 0xe800 on atapci1 ata5: at 0xe000 on atapci1 atapci2: <VIA 8237 ATA133 controller> port 0xfc00-0xfc0f at device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci2 ata1: at 0x170 irq 15 on atapci2 ad0: 39205MB <ASI ARAID99 1000 Rev 2.5> [79656/16/63] at ata0-master UDMA133 ad4: 78167MB <Maxtor 6Y080L0> [158816/16/63] at ata2-master UDMA133 Long live 4.10 FreeBSD VIA 8237 support! Now I will never have to start using 5.x series. :) Yay! - Mark _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to "[EMAIL PROTECTED]"
