Hi,
Got a new 3Com Airconnect pci card here that probes (on 4.6-STABLE) as:
>pci0: <unknown card> (vendor=0x1039, dev=0x7012) at 2.7 irq 5
With the following patch:
--- if_wi_pci.c 2002/06/16 18:07:18 1.8.2.3
+++ if_wi_pci.c 2002/07/23 09:46:43
@@ -93,6 +93,7 @@
} pci_ids[] = {
/* Sorted by description */
{0x10b7, 0x7770, WI_BUS_PCI_PLX, "3Com Airconnect"},
+ {0x1039, 0x7012, WI_BUS_PCI_PLX, "3Com Airconnect too"},
{0x16ab, 0x1101, WI_BUS_PCI_PLX, "GLPRISM2 WaveLAN"},
{0x1260, 0x3873, WI_BUS_PCI_NATIVE, "Intersil Prism2.5"},
{0x16ab, 0x1102, WI_BUS_PCI_PLX, "Linksys WDT11"},
...the probe seems rather out to lunch:
>wi0: <3Com Airconnect too> port 0xd400-0xd43f,0xd800-0xd8ff irq 5 at
>device 2.7 on pci0
>wi0: wi_pci_attach() failed to enable pci!
>device_probe_and_attach: wi0 attach returned 6
>sis0: <SiS 900 10/100BaseTX> port 0xd000-0xd0ff mem 0xcbfec000-0xcbfecfff
>irq 12 at device 3.0 on pci0
>sis0: Ethernet address: 00:d0:09:e9:e9:7e
>miibus0: <MII bus> on sis0
>rlphy0: <RTL8201L 10/100 media interface> on miibus0
>rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>pci0: <S3 Trio 64V2/DX/GX graphics accelerator> at 9.0 irq 0
>wi0: <3Com Airconnect> port 0xc800-0xc83f,0xcc00-0xcc7f mem
>0xcbfeb000-0xcbfebfff irq
>5 at device 11.0 on pci0
>wi0: 802.11 address: 00:04:75:88:a7:0b
>wi0: using RF:PRISM2 MAC:HFA3841 CARD:HWB3163 rev.A
>wi0: Intersil Firmware: Primary 0.03.00, Station 0.08.03
... but the card seems to work perfectly well. Anyone know what's going on
here? TIA
--
Bob Bishop +44 (0)118 977 4017
[EMAIL PROTECTED] fax +44 (0)118 989 4254
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the message
