On 16/01/2012, at 2:34 PM, Julian Elischer wrote: > On 1/13/12 11:00 PM, Jan Mikkelsen wrote: >> Hi, >> >> I'm looking to upgrade a system running frame relay over a Sangoma A101 card >> and WANPIPE. >> >> Sangoma do not support FreeBSD anymore, so I'm looking for alternatives. >> >> What hardware does ng_frame_relay support now that ar(4) and sr(4) are not >> in FreeBSD 9? >> >> Specifically, will ng_frame_relay work with a Digium TE121 and >> ports/dahdi-kmod? >> >> Any suggestions welcome, G.703, X.21 or V.35 interfaces OK. > > Unfortunately, with the advent of Ethernet connected internet feeds (e.g. > dsl, cable etc), > plain synchronous interfaces have become almost irrelevant for most of the > developers. > If you can find a card that "would have" been usable with the ar or sr > drivers and you have one for testing, we could possibly resurrect it with > your help, > but none of the current developers have such a card.. (that I know of).
Thanks. For now I'm going with a standalone router. This is a single link for a communicating with a legacy application at a government body, so I'm not looking to invest significant amounts of time. I was curious about about what was involved in hooking ng_frame_relay up to one of the E1 based telephone cards to do frame relay. Perhaps if I get one of the cards for another purpose I'll have a look. Regards, Jan._______________________________________________ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to "freebsd-hackers-unsubscr...@freebsd.org"
