On Sat, 29 Jan 2011, Damien Fleuriot wrote:
Hello lists,
I'm trying to get FreeBSD 8.0 or 8.1 to run on a Dell poweredge r210 server.
It ships with a SATA/SAS h200 RAID controller.
Sadly, the MFI driver doesn't seem to register for this card...
Find below the pciconf -lcvb
--
none6@pci0:1:0:0: class=0x010700 card=0x1f1d1028 chip=0x00721000
rev=0x02 hdr=0x00
vendor = 'LSI Logic (Was: Symbios Logic, NCR)'
class = mass storage
subclass = SAS
bar [10] = type I/O Port, range 32, base 0xfc00, size 256, enabled
bar [14] = type Memory, range 64, base 0xdf2b0000, size 65536, enabled
bar [1c] = type Memory, range 64, base 0xdf2c0000, size 262144, enabled
cap 01[50] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 10[68] = PCI-Express 2 endpoint max data 256(4096) link x8(x8)
cap 03[d0] = VPD
cap 05[a8] = MSI supports 1 message, 64 bit
cap 11[c0] = MSI-X supports 15 messages in map 0x14
--
I have added the following to /usr/src/sys/dev/mfi/mfi_pci.c at line 119:
--
{0x1000, 0x0072, 0x1028, 0x1f1e, MFI_FLAGS_GEN2, "Dell PERC H200 Integrated"},
--
It's 1f1d not 1f1e. I hope it was only a paste problem into email?
Rebuilt the kernel, tried it on the server, still no luck recognizing
the RAID card.
As a last resort I'll be setting the drives to passthrough and using a
software RAID, but I'd much rather this worked out.
Note that mfi actually recognizes Dell's h700 and h800 cards.
Anyone managed to get the h200 card working yet ?
@hackers: please keep me cc'd, I'm not subscribed to this list.
Regards,
--
dfl
_______________________________________________
freebsd-sta...@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
--
Bjoern A. Zeeb You have to have visions!
<ks> Going to jail sucks -- <bz> All my daemons like it!
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/jails.html
_______________________________________________
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to "freebsd-hackers-unsubscr...@freebsd.org"
