Are you talking about BSDoid or FreeDroid?
On Sun, Jan 16, 2011 at 8:17 AM, Kostik Belousov <kostik...@gmail.com> wrote: > On Sun, Jan 16, 2011 at 01:58:26PM +0100, Hans Petter Selasky wrote: >> On Sunday 16 January 2011 13:30:33 Aryeh Friedman wrote: >> > On Sun, Jan 16, 2011 at 7:27 AM, Hans Petter Selasky <hsela...@c2i.net> >> wrote: >> > > On Sunday 16 January 2011 13:20:39 Aryeh Friedman wrote: >> > >> On Sun, Jan 16, 2011 at 7:07 AM, Hans Petter Selasky <hsela...@c2i.net> >> > > >> > > wrote: >> > >> > On Sunday 16 January 2011 12:59:17 Aryeh Friedman wrote: >> > >> >> On Sun, Jan 16, 2011 at 6:48 AM, Hans Petter Selasky >> > >> >> <hsela...@c2i.net> >> > >> > >> > >> > wrote: >> > >> >> > On Sunday 16 January 2011 11:49:28 Hans Petter Selasky wrote: >> > >> >> >> if_cdce kernel, >> > >> >> > >> > >> >> > if_cdce kernel module >> > >> >> > >> > >> >> > --HPS >> > >> >> >> > >> >> flosoft-stable# kldload if_cdce >> > >> >> kldload: can't load if_cdce: File exists >> > >> > >> > >> > Any ueX network interfaces? >> > >> >> > >> None >> > >> >> > >> > Also: >> > > And what about: >> > > >> > > usbconfig -d X.Y dump_curr_config_desc >> > >> > flosoft-stable# usbconfig -d 5.2 dump_curr_config_desc >> > ugen5.2: <Android Phone HTC> at usbus5, cfg=0 md=HOST spd=HIGH (480Mbps) >> > pwr=ON >> > >> > >> > Configuration index 0 >> > >> > bLength = 0x0009 >> > bDescriptorType = 0x0002 >> > wTotalLength = 0x0037 >> > bNumInterfaces = 0x0002 >> > bConfigurationValue = 0x0001 >> > iConfiguration = 0x0000 <no string> >> > bmAttributes = 0x0080 >> > bMaxPower = 0x0080 >> > >> > Interface 0 >> > bLength = 0x0009 >> > bDescriptorType = 0x0004 >> > bInterfaceNumber = 0x0000 >> > bAlternateSetting = 0x0000 >> > bNumEndpoints = 0x0002 >> > bInterfaceClass = 0x0008 >> > bInterfaceSubClass = 0x0006 >> > bInterfaceProtocol = 0x0050 >> > iInterface = 0x0000 <no string> >> > >> > Endpoint 0 >> > bLength = 0x0007 >> > bDescriptorType = 0x0005 >> > bEndpointAddress = 0x0001 <OUT> >> > bmAttributes = 0x0002 <BULK> >> > wMaxPacketSize = 0x0200 >> > bInterval = 0x0000 >> > bRefresh = 0x0000 >> > bSynchAddress = 0x0000 >> > >> > Endpoint 1 >> > bLength = 0x0007 >> > bDescriptorType = 0x0005 >> > bEndpointAddress = 0x0081 <IN> >> > bmAttributes = 0x0002 <BULK> >> > wMaxPacketSize = 0x0200 >> > bInterval = 0x0000 >> > bRefresh = 0x0000 >> > bSynchAddress = 0x0000 >> > >> > >> > Interface 1 >> > bLength = 0x0009 >> > bDescriptorType = 0x0004 >> > bInterfaceNumber = 0x0001 >> > bAlternateSetting = 0x0000 >> > bNumEndpoints = 0x0002 >> > bInterfaceClass = 0x00ff >> > bInterfaceSubClass = 0x0042 >> > bInterfaceProtocol = 0x0001 >> > iInterface = 0x0000 <no string> >> > >> > Endpoint 0 >> > bLength = 0x0007 >> > bDescriptorType = 0x0005 >> > bEndpointAddress = 0x0002 <OUT> >> > bmAttributes = 0x0002 <BULK> >> > wMaxPacketSize = 0x0200 >> > bInterval = 0x0000 >> > bRefresh = 0x0000 >> > bSynchAddress = 0x0000 >> > >> > Endpoint 1 >> > bLength = 0x0007 >> > bDescriptorType = 0x0005 >> > bEndpointAddress = 0x0082 <IN> >> > bmAttributes = 0x0002 <BULK> >> > wMaxPacketSize = 0x0200 >> > bInterval = 0x0000 >> > bRefresh = 0x0000 >> > bSynchAddress = 0x0000 >> >> Looks like interface 1 is the ADB one (vendor specific). If the ADB client is >> not using LibUSB then you might get it working by adding the vendor ID and >> product ID to sys/dev/usb/serial/u3g.c as listed by dump_device_desc . A >> /dev/cuaU0 will then be created which you can use to transfer data. > > FWIW, I successfully used adb from freebsd port of android SDK to > connect to Samsung Galaxy S. For sure, it only worked on i386, but > this is a known issue with libusb. > _______________________________________________ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to "freebsd-hackers-unsubscr...@freebsd.org"
