On Saturday 15 January 2011 22:55:30 Aryeh Friedman wrote: > I am brand new to the whole android development thing... All I know is > the phone some how makes it self look like a Linux machine to the > outside world (how and such I have no clue)... when I connected it to > USB I got: > > ugen5.2: <HTC> at usbus5 > umass0: <HTC Android Phone, class 0/0, rev 1.02/1.00, addr 2> on usbus5 > umass0: SCSI over Bulk-Only; quirks = 0x0000 > umass0:0:0:-1: Attached to scbus0 > (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 > (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error > (probe0:umass-sim0:0:0:0): SCSI status: Check Condition > (probe0:umass-sim0:0:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power > on, reset, or bus device reset occurred) > (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 > (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error > (probe0:umass-sim0:0:0:0): SCSI status: Check Condition > (probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not > present) da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 > da0: <HTC Android Phone 0100> Removable Direct Access SCSI-2 device > da0: 40.000MB/s transfers > da0: Attempt to query device size failed: NOT READY, Medium not present > > My mother board has a built in NIC so I think no WiFi there but I go > through a NetGear 54g router so if you can tell me the default IP or > anything else that would be helpful (the phone is completely set to > factory defaults has no SIM card or service)
You could try loading the if_cdce kernel, else if your ADB client is using LibUSB it should work. --HPS _______________________________________________ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to "freebsd-hackers-unsubscr...@freebsd.org"
