There's a single gpt partition of type *Linux RAID* on each disk.
geom_part_gpt is apparently already in the kernel, according to kldload
geom_part_gpt, but doesn't appear in the list returns by kldstat and I
don't have GEOM_PART_GPT in my kernconf.

I'll rebuild the kernel with GEOM_PART_GPT and retry.

Thanks for steer.

/Harry


On Fri, 8 Feb 2019 at 19:19, Gary Palmer <gpal...@freebsd.org> wrote:

> On Fri, Feb 08, 2019 at 06:58:56PM +0000, Harry Newton wrote:
> >  Name Status Components
> > da0p1     OK da0
> >
> > and the same for da1.
> >
> >
> > On Thu, 7 Feb 2019 at 14:25, Gary Palmer <gpal...@freebsd.org> wrote:
> >
> > > On Thu, Feb 07, 2019 at 05:36:03AM +0000, Harry Newton wrote:
> > > > Trying to read a Linux raid array ( as per
> > > > https://wiki.archlinux.org/index.php/Software_RAID_and_LVM ) which
> I can
> > > > read perfectly well on a couple of Linux boxes.  geom_linux_lvm.ko
> > > loaded,
> > > > but:
> > > >
> > > >   geom linux_lvm list
> > > >   geom linux_lvm status
> > > >
> > > > return nothing.  kern.geom.debugflags=16 and
> > > kern.geom.linux_lvm.debug=16,
> > > > but *nothing* in logs.  No /dev/linux_lvm/ entries appear, though
> the two
> > > > component disks appear as /dev/da0 and /dev/da1.
> > > >
> > > > Suspect I maybe missing something obvious: any ideas where I can
> start
> > > > debugging this ?
> > >
> > > Unless I'm missing something (not a big Linux user), LVM is normally
> > > as a partition on the disks, not the whole disk.  Do the disk
> > > partitions show up or just the whole disks?  What does
> > >
> > > gpart show da0
> > > gpart show da1
> > >
> > > return?
> > >
> > > Gary
> > >
>
> Hi,
>
> Do you know if the disks are partitioned under Linux?  If so, you'll need
> to find the appropriate partition module for FreeBSD.  e.g.
> geom_part_mbr or geom_part_gpt or something.
>
> Regards,
>
> Gary
>


-- 
Harry Newton
_______________________________________________
freebsd-geom@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-geom
To unsubscribe, send any mail to "freebsd-geom-unsubscr...@freebsd.org"

Reply via email to