On Fri, Feb 08, 2019 at 06:58:56PM +0000, Harry Newton wrote: > Name Status Components > da0p1 OK da0 > > and the same for da1. > > > On Thu, 7 Feb 2019 at 14:25, Gary Palmer <gpal...@freebsd.org> wrote: > > > On Thu, Feb 07, 2019 at 05:36:03AM +0000, Harry Newton wrote: > > > Trying to read a Linux raid array ( as per > > > https://wiki.archlinux.org/index.php/Software_RAID_and_LVM ) which I can > > > read perfectly well on a couple of Linux boxes. geom_linux_lvm.ko > > loaded, > > > but: > > > > > > geom linux_lvm list > > > geom linux_lvm status > > > > > > return nothing. kern.geom.debugflags=16 and > > kern.geom.linux_lvm.debug=16, > > > but *nothing* in logs. No /dev/linux_lvm/ entries appear, though the two > > > component disks appear as /dev/da0 and /dev/da1. > > > > > > Suspect I maybe missing something obvious: any ideas where I can start > > > debugging this ? > > > > Unless I'm missing something (not a big Linux user), LVM is normally > > as a partition on the disks, not the whole disk. Do the disk > > partitions show up or just the whole disks? What does > > > > gpart show da0 > > gpart show da1 > > > > return? > > > > Gary > >
Hi, Do you know if the disks are partitioned under Linux? If so, you'll need to find the appropriate partition module for FreeBSD. e.g. geom_part_mbr or geom_part_gpt or something. Regards, Gary _______________________________________________ freebsd-geom@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-geom To unsubscribe, send any mail to "freebsd-geom-unsubscr...@freebsd.org"
