I have a Sony VAIO PCG-Z600NE with an internal fxp0. I do not configure the
network in rc.conf as I do not want to launch dhclient unconditionnaly.
As long as the interface has not been brought up, I get errors when packets
are seen on it (well, I guess this is it, I receive approximately two
messages per second, which correspond to the frequency of the broadcasts
on my switched network). See end of dmesg for warnings. This is -CURRENT from
one hour ago.
Note that with late december -CURRENT, I got panics when booting with Ethernet
plugged in.
Sam
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Thu Jan 4 14:31:57 CET 2001
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/TRILLIAN
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (645.21-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 134152192 (131008K bytes)
avail memory = 126152704 (123196K bytes)
Preloaded elf kernel "kernel" at 0xc0446000.
Preloaded elf module "ipl.ko" at 0xc044609c.
link_elf: symbol pfil_add_hook undefined
KLD file ipl.ko - could not finalize loading
Pentium Pro MTRR support enabled
ACPI debug layer 0x0 debug level 0x0
Using $PIR table, 7 entries at 0xc00fdf50
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
acpi0: <SONY Z1 > on motherboard
acpi_tz0: <thermal zone> on acpi0
acpi_tz0: current temperature 65.9C
acpi_button0: <Control Method Power Button Device> on acpi0
acpi_pcib0: <Host-PCI bridge> on acpi0
pci0: <PCI bus> on acpi_pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vga_pci0: <VGA-compatible display device> mem
0xfeb00000-0xfebfffff,0xfe400000-0xfe7fffff,0xfc000000-0xfdffffff irq 9 at device 0.0
on pci1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfc90-0xfc9f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfca0-0xfcbf irq 9 at device
7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at 7.3 (no driver attached)
pci0: <serial bus, FireWire> at 8.0 (no driver attached)
pcm0: <Yamaha DS-1E (YMF744)> port 0xfc8c-0xfc8f,0xfcc0-0xfcff mem
0xfedf8000-0xfedfffff irq 9 at device 9.0 on pci0
pci0: <simple comms> at 10.0 (no driver attached)
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xfc40-0xfc7f mem
0xfec00000-0xfecfffff,0xfedf6000-0xfedf6fff irq 9 at device 11.0 on pci0
fxp0: Ethernet address 08:00:46:0c:b4:c7
pcic-pci0: <Ricoh RL5C475 PCI-CardBus Bridge> at device 12.0 on pci0
pci0: <old, non-VGA display device> at 13.0 (no driver attached)
acpi_ec0: <embedded controller> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
acpi_acad0: On Line
acpi_pr0: <processor device> on acpi0
acpi_pr0: supported power states: C0 (0us) C1 (0us) C2 (10us)
acpi_pr0: supported throttling states: 100% 87% 75% 62% 50% 37% 25% 12%
acpi_timer0: <24-bit timer at 3.579545MHz> on acpi0
npx0: <math processor> on motherboard
npx0: INT 16 interface
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 irq 10 on isa0
pcic0: management irq 10
pccard0: <PC Card bus -- kludge version> on pcic0
pmtimer0 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
spic0: <Sony Programmable I/O Controller> at port 0x10a0-0x10a4 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atspeaker0: <AT speaker> at port 0x61 on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0F13> can't assign resources
unknown: <SNY6001> can't assign resources
ppc1: parallel port not found.
ppc1: parallel port not found.
unknown: <PNP0401> can't assign resources
ppc1: parallel port not found.
IPsec: Initialized Security Association Processing.
ad0: 11513MB <IBM-DARA-212000> [23392/16/63] at ata0-master UDMA33
Mounting root from ufs:/dev/ad0s2a
swi_net: unregistered isr number: 18.
swi_net: unregistered isr number: 18.
swi_net: unregistered isr number: 18.
swi_net: unregistered isr number: 18.
swi_net: unregistered isr number: 18.
swi_net: unregistered isr number: 18.
swi_net: unregistered isr number: 18.
swi_net: unregistered isr number: 18.
swi_net: unregistered isr number: 18.
swi_net: unregistered isr number: 18.
swi_net: unregistered isr number: 18.
swi_net: unregistered isr number: 18.
swi_net: unregistered isr number: 18.
swi_net: unregistered isr number: 18.
swi_net: unregistered isr number: 18.
swi_net: unregistered isr number: 18.
swi_net: unregistered isr number: 18.
swi_net: unregistered isr number: 18.
swi_net: unregistered isr number: 18.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
