----- Original Message -----
From: "Cosmic 665" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Wednesday, April 19, 2000 5:44 PM
Subject: /dev/dsp device not configured
> how can I configure/reconfigure /dev/dsp under FreeBSD 4.0??
Did you /dev/MAKEDEV snd0?
I keep getting
> a message stating that the device is not configured!! furthermore my
> soundcard isn't working right when it should be!! I've also attached my
> dmesg and kernel config. BTW, I'm currnetly using 5.0-CURRENT as of last
> night (BUT THAT ISN't the cause of this so plz.. DON'T TELL ME IT IS
without
> a decent explaination!!!) I've also tried this in 4.0 and 3.4. I'm using
an
> ESS 1869 pnp (with the sbc sound adapter). Also, I'm running Xfree86 3.3.6
> which I've had some issues with in the past (could this be the cause?).
> below is my dmesg and Kernel
>
> thanks
> -Cosmic-665
>
> P.S. is there a newsgroup for -CURRNET?? what is the address??
>
> here's my dmesg;
> Copyright (c) 1992-2000 The FreeBSD Project.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California. All rights reserved.
> FreeBSD 5.0-CURRENT #0: Tue Apr 18 22:15:25 PDT 2000
> [EMAIL PROTECTED]:/usr/src/sys/compile/MATRIX
> Timecounter "i8254" frequency 1193182 Hz
> CPU: AMD-K6(tm) 3D processor (400.91-MHz 586-class CPU)
> Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
> Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
> AMD Features=0x80000800<SYSCALL,3DNow!>
> real memory = 134201344 (131056K bytes)
> config> di psm0
> config> di sn0
> No such device: sn0
> Invalid command or syntax. Type `?' for help.
> config> di lnc0
> No such device: lnc0
> Invalid command or syntax. Type `?' for help.
> config> di le0
> No such device: le0
> Invalid command or syntax. Type `?' for help.
> config> di ie0
> No such device: ie0
> Invalid command or syntax. Type `?' for help.
> config> di fe0
> No such device: fe0
> Invalid command or syntax. Type `?' for help.
> config> di ed0
> No such device: ed0
> Invalid command or syntax. Type `?' for help.
> config> di cs0
> No such device: cs0
> Invalid command or syntax. Type `?' for help.
> config> di bt0
> No such device: bt0
> Invalid command or syntax. Type `?' for help.
> config> di aic0
> No such device: aic0
> Invalid command or syntax. Type `?' for help.
> config> di aha0
> No such device: aha0
> Invalid command or syntax. Type `?' for help.
> config> di adv0
> No such device: adv0
> Invalid command or syntax. Type `?' for help.
> config> q
> avail memory = 126738432 (123768K bytes)
> Preloaded elf kernel "kernel" at 0xc03a1000.
> Preloaded userconfig_script "/boot/kernel.conf" at 0xc03a109c.
> VESA: v3.0, 16384k memory, flags:0x1, mode table:0xc033e477 (1000117)
> VESA: 3Dfx Interactive, Inc.
> K6-family MTRR support enabled (2 registers)
> md0: Malloc disk
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pcib0: <AcerLabs M1541 (Aladdin-V) PCI host bridge> on motherboard
> pci0: <PCI bus> on pcib0
> pcib1: <AcerLabs M5243 PCI-PCI bridge> at device 1.0 on pci0
> pci1: <PCI bus> on pcib1
> pci1: <3Dfx Voodoo Banshee graphics accelerator> at 0.0 irq 11
> chip1: <AcerLabs M15x3 Power Management Unit> at device 3.0 on pci0
> isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0
> isa0: <ISA bus> on isab0
> dc0: <Intel 21143 10/100BaseTX> port 0xb800-0xb87f mem
0xdd000000-0xdd00007f
> irq 9 at device 9.0 on pci0
> dc0: Ethernet address: 00:00:f8:09:34:80
> miibus0: <MII bus> on dc0
> dcphy0: <Intel 21143 NWAY media interface> on miibus0
> dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> dc0: supplying EUI64: 00:00:f8:ff:fe:09:34:80
> dc1: <82c169 PNIC 10/100BaseTX> port 0xb400-0xb4ff mem
0xdc800000-0xdc8000ff
> irq 12 at device 10.0 on pci0
> dc1: Ethernet address: 00:a0:cc:5d:6c:d0
> miibus1: <MII bus> on dc1
> ukphy0: <Generic IEEE 802.3u media interface> on miibus1
> ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> atapci0: <AcerLabs Aladdin ATA33 controller> port 0xb000-0xb00f irq 0 at
> device 15.0 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: at 0x170 irq 15 on atapci0
> fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> sc0: <System console> on isa0
> sc0: VGA <16 virtual consoles, flags=0x200>
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1 at port 0x2f8-0x2ff irq 3 on isa0
> sio1: type 16550A
> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/7 bytes threshold
> ppi0: <Parallel I/O> on ppbus0
> ppi0: can't allocate irq
> device_probe_and_attach: ppi0 attach returned 12
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> plip0: <PLIP network interface> on ppbus0
> unknown: <PNP0401> can't assign resources
> unknown: <PNP0501> can't assign resources
> unknown: <PNP0501> can't assign resources
> unknown: <PNP0700> can't assign resources
> unknown0: <PNP0c01> at iomem
>
0-0x9ffff,0x100000-0x7ffffff,0xe8000-0xeffff,0xf0000-0xf3fff,0xf4000-0xf7fff
,0xf8000-0xfbfff,0xfc000-0xfffff,0xfffe0000-0xffffffff
> on isa0
> unknown: <PNP0000> can't assign resources
> unknown1: <PNP0100> at port 0x40-0x43 irq 0 on isa0
> unknown2: <PNP0b00> at port 0x70-0x71 irq 8 on isa0
> unknown: <PNP0303> can't assign resources
> unknown3: <PNP0c04> at port 0xf0 irq 13 on isa0
> unknown4: <PNP0200> at port 0-0xf,0x80-0x90,0x94-0x9f,0xc0-0xde drq 4 on
> isa0
> unknown5: <PNP0800> at port 0x61 on isa0
> unknown6: <PNP0a03> at port 0xcf8-0xcff on isa0
> unknown7: <PNP0c02> at port
> 0x290-0x297,0x40b,0x480-0x49f,0x4d6,0xec00-0xec3f,0xe800-0xe83f on isa0
> esscontrol0: <ESS Control> at port 0x800-0x807 on isa0
> sbc1: <ESS ES1869> at port 0x220-0x22f,0x388-0x38b,0x330-0x331 irq 5 drq
1,0
> on isa0
> pcm0: <ESS 18xx DSP> on sbc1
> unknown8: <ESS ES1869 Plug and Play AudioDrive> at port 0x201 on isa0
> IP packet filtering initialized, divert enabled, rule-based forwarding
> enabled, default to accept, logging limited to 100 packets/entry by
default
> DUMMYNET initialized (000106)
> IPv6 packet filtering initialized, default to accept, logging limited to
100
> packets/entry
> IP Filter: initialized. Default = pass all, Logging = enabled
> IP Filter: v3.3.8
> ad0: 8063MB <Maxtor 90845D4> [16383/16/63] at ata0-master using UDMA33
> ad1: 6149MB <QUANTUM FIREBALL CX6.4A> [13328/15/63] at ata0-slave using
> UDMA33
> acd0: CDROM <ATAPI 40X CDROM> at ata1-master using PIO4
> Mounting root from ufs:/dev/ad0s1a
> dc0: starting DAD for fe80:0001::0200:f8ff:fe09:3480
> dc1: starting DAD for fe80:0002::02a0:ccff:fe5d:6cd0
> dc0: DAD complete for fe80:0001::0200:f8ff:fe09:3480 - no duplicates found
> WARNING: run /dev/MAKEDEV before 2000-06-01 to get rid of block devices
> dc1: DAD complete for fe80:0002::02a0:ccff:fe5d:6cd0 - no duplicates found
> pid 174 (ldconfig), uid 0: exited on signal 11 (core dumped)
> microuptime() went backwards (53234.680005 -> 53234,-694706140)
> microuptime() went backwards (55336.561761 -> 55336,-694824432)
>
> Here's my kernel:
> #
> # $FreeBSD: src/sys/i386/conf/MATRIX,v 1.251 2000/04/17 06:48:43 Kareem
Exp
> $
>
> machine i386
> cpu I386_CPU
> cpu I486_CPU
> cpu I586_CPU
> cpu I686_CPU
> ident MATRIX
> maxusers 64
>
> makeoptions DEBUG=-g #Build kernel with gdb(1) debug
> symbols
>
> options MATH_EMULATE #Support for x87 emulation
> options INET #InterNETworking
> options INET6 #IPv6 communications protocols
> options FFS #Berkeley Fast Filesystem
> options FFS_ROOT #FFS usable as root device [keep
> this!]
> options MFS #Memory Filesystem
> options MD_ROOT #MD is a potential root device
> options NFS #Network Filesystem
> options NFS_ROOT #NFS usable as root device, NFS
> required
> options MSDOSFS #MSDOS Filesystem
> options CD9660 #ISO 9660 Filesystem
> options CD9660_ROOT #CD-ROM usable as root, CD9660
> required
> options PROCFS #Process filesystem
> options COMPAT_43 #Compatible with BSD 4.3 [KEEP
> THIS!]
> options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
> options UCONSOLE #Allow users to grab the console
> options USERCONFIG #boot -c editor
> options VISUAL_USERCONFIG #visual boot -c editor
> options KTRACE #ktrace(1) support
> options SYSVSHM #SYSV-style shared memory
> options SYSVMSG #SYSV-style message queues
> options SYSVSEM #SYSV-style semaphores
> options P1003_1B #Posix P1003_1B real-time
extentions
> options _KPOSIX_PRIORITY_SCHEDULING
> options ICMP_BANDLIM #Rate limit bad replies
> options PNPBIOS
>
> # ADDED opts
> options VESA
> options CPU_WT_ALLOC
> options TCP_COMPAT_42 #emulate 4.2BSD TCP bugs
> options MROUTING # Multicast routing
> options IPFIREWALL #firewall
> options IPFIREWALL_VERBOSE #print information about
> # dropped packets
> options IPFIREWALL_FORWARD #enable transparent proxy support
> options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity
> options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by
default
> options IPV6FIREWALL #firewall for IPv6
> options IPV6FIREWALL_VERBOSE
> options IPV6FIREWALL_VERBOSE_LIMIT=100
> options IPV6FIREWALL_DEFAULT_TO_ACCEPT
> options IPDIVERT #divert sockets
> options IPFILTER #ipfilter support
> options IPFILTER_LOG #ipfilter logging
> options IPSTEALTH #support for stealth forwarding
> options TCPDEBUG
> options COMPAT_SVR4 # build emulator statically
> #options DEBUG_SVR4 # enable verbose debugging
> pseudo-device streams # STREAMS network driver (required for
> svr4).
> options DUMMYNET
> options USER_LDT #allow user-level control of i386
> ldt
>
>
> # To make an SMP kernel, the next two are needed
> #options SMP # Symmetric MultiProcessor Kernel
> #options APIC_IO # Symmetric (APIC) I/O
> # Optionally these may need tweaked, (defaults shown):
> #options NCPU=2 # number of CPUs
> #options NBUS=4 # number of busses
> #options NAPIC=1 # number of IO APICs
> #options NINTR=24 # number of INTs
>
> device pcm
> device isa
> device eisa
> device pci
> options COMPAT_OLDISA # Old ISA driver shims
> options COMPAT_OLDPCI # Old PCI driver shims
>
> # sound opts
> device sbc0 at isa? port 0x220 irq 5 drq 1 flags 0x15
> #device snd
> #device pas0 at isa? port 0x388 irq 10 drq 6
> #device sb0 at isa? port 0x220 irq 5 drq 1
> #device sbxvi0 at isa? drq 5
> #device sbmidi0 at isa? port 0x330
> #device awe0 at isa? port 0x620
> #device gus0 at isa? port 0x220 irq 12 drq 1
> ##device gus0 at isa? port 0x220 irq 12 drq 1 flags 0x3
> #device mss0 at isa? port 0x530 irq 10 drq 1
> #device css0 at isa? port 0x534 irq 5 drq 1 flags 0x08
> #device sscape0 at isa? port 0x330 irq 9 drq 0
> #device trix0 at isa? port 0x330 irq 6 drq 0
> #device sscape_mss0 at isa? port 0x534 irq 5 drq 1
> #device opl0 at isa? port 0x388
> #device mpu0 at isa? port 0x330 irq 6 drq 0
> #device uart0 at isa? port 0x330 irq 5
>
>
> # Floppy drives
> device fdc0 at isa? port IO_FD1 irq 6 drq 2
> device fd0 at fdc0 drive 0
> device fd1 at fdc0 drive 1
>
> # ATA and ATAPI devices
> device ata0 at isa? port IO_WD1 irq 14
> device ata1 at isa? port IO_WD2 irq 15
> device ata
> device atadisk # ATA disk drives
> device atapicd # ATAPI CDROM drives
> device atapifd # ATAPI floppy drives
> device atapist # ATAPI tape drives
> options ATA_STATIC_ID #Static device numbering
> #options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices
>
>
> # atkbdc0 controls both the keyboard and the PS/2 mouse
> device atkbdc0 at isa? port IO_KBD
> device atkbd0 at atkbdc? irq 1
> device psm0 at atkbdc? irq 12
>
> device vga0 at isa?
>
> # splash screen/screen saver
> pseudo-device splash
>
> # syscons is the default console driver, resembling an SCO console
> device sc0 at isa?
> options SC_NORM_ATTR="(FG_LIGHTBLUE |BG_BLACK)"
> #options SC_NORM_REV_ATTR="(FG_BLACK|BG_LIGHTBLUE)"
> #options SC_KERNEL_CONS_ATTR="(FG_LIGHTRED |BG_BLACK)"
> #options SC_KERNEL_CONS_REV_ATTR="(FG_BLACK|BG_LIGHTRED)"
>
> # Floating point support - do not disable.
> device npx0 at nexus? port IO_NPX irq 13
>
> # Power management support (see LINT for more options)
> device apm0 at nexus? disable flags 0x20 # Advanced Power
> Management
>
> # Serial (COM) ports
> device sio0 at isa? port IO_COM1 flags 0x10 irq 4
> device sio1 at isa? port IO_COM2 irq 3
> device sio2 at isa? disable port IO_COM3 irq 5
> device sio3 at isa? disable port IO_COM4 irq 9
>
> # Parallel port
> device ppc0 at isa? irq 7
> device ppbus # Parallel port bus (required)
> device lpt # Printer
> device plip # TCP/IP over parallel
> device ppi # Parallel port interface device
> #device vpo # Requires scbus and da
>
>
> # PCI Ethernet NICs.
> device de # DEC/Intel DC21x4x (``Tulip'')
> device fxp # Intel EtherExpress PRO/100B (82557,
82558)
> device tx # SMC 9432TX (83c170 ``EPIC'')
> device vx # 3Com 3c590, 3c595 (``Vortex'')
> device wx # Intel Gigabit Ethernet Card
(``Wiseman'')
>
> # PCI Ethernet NICs that use the common MII bus controller code.
> device miibus # MII bus support
> device dc # DEC/Intel 21143 and various workalikes
> device rl # RealTek 8129/8139
> device sf # Adaptec AIC-6915 (``Starfire'')
> device sis # Silicon Integrated Systems SiS 900/SiS
> 7016
> device ste # Sundance ST201 (D-Link DFE-550TX)
> device tl # Texas Instruments ThunderLAN
> device vr # VIA Rhine, Rhine II
> device wb # Winbond W89C840F
> device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
>
> # Pseudo devices - the number indicates how many units to allocated.
> pseudo-device loop # Network loopback
> pseudo-device ether # Ethernet support
> pseudo-device sl 1 # Kernel SLIP
> pseudo-device ppp 1 # Kernel PPP
> pseudo-device tun # Packet tunnel.
> pseudo-device pty # Pseudo-ttys (telnet etc)
> pseudo-device md # Memory "disks"
> pseudo-device gif 4 # IPv6 and IPv4 tunneling
> pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
>
> # The `bpf' pseudo-device enables the Berkeley Packet Filter.
> # Be aware of the administrative consequences of enabling this!
> pseudo-device bpf # Berkeley packet filter
> ______________________________________________________
> Get Your Private, Free Email at http://www.hotmail.com
>
>
>
> To Unsubscribe: send mail to [EMAIL PROTECTED]
> with "unsubscribe freebsd-current" in the body of the message
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
