how can I configure/reconfigure /dev/dsp under FreeBSD 4.0?? I keep getting
a message stating that the device is not configured!! furthermore my
soundcard isn't working right when it should be!! I've also attached my
dmesg and kernel config. BTW, I'm currnetly using 5.0-CURRENT as of last
night (BUT THAT ISN't the cause of this so plz.. DON'T TELL ME IT IS without
a decent explaination!!!) I've also tried this in 4.0 and 3.4. I'm using an
ESS 1869 pnp (with the sbc sound adapter). Also, I'm running Xfree86 3.3.6
which I've had some issues with in the past (could this be the cause?).
below is my dmesg and Kernel
thanks
-Cosmic-665
P.S. is there a newsgroup for -CURRNET?? what is the address??
here's my dmesg;
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Tue Apr 18 22:15:25 PDT 2000
[EMAIL PROTECTED]:/usr/src/sys/compile/MATRIX
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD-K6(tm) 3D processor (400.91-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
real memory = 134201344 (131056K bytes)
config> di psm0
config> di sn0
No such device: sn0
Invalid command or syntax. Type `?' for help.
config> di lnc0
No such device: lnc0
Invalid command or syntax. Type `?' for help.
config> di le0
No such device: le0
Invalid command or syntax. Type `?' for help.
config> di ie0
No such device: ie0
Invalid command or syntax. Type `?' for help.
config> di fe0
No such device: fe0
Invalid command or syntax. Type `?' for help.
config> di ed0
No such device: ed0
Invalid command or syntax. Type `?' for help.
config> di cs0
No such device: cs0
Invalid command or syntax. Type `?' for help.
config> di bt0
No such device: bt0
Invalid command or syntax. Type `?' for help.
config> di aic0
No such device: aic0
Invalid command or syntax. Type `?' for help.
config> di aha0
No such device: aha0
Invalid command or syntax. Type `?' for help.
config> di adv0
No such device: adv0
Invalid command or syntax. Type `?' for help.
config> q
avail memory = 126738432 (123768K bytes)
Preloaded elf kernel "kernel" at 0xc03a1000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03a109c.
VESA: v3.0, 16384k memory, flags:0x1, mode table:0xc033e477 (1000117)
VESA: 3Dfx Interactive, Inc.
K6-family MTRR support enabled (2 registers)
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <AcerLabs M1541 (Aladdin-V) PCI host bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <AcerLabs M5243 PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <3Dfx Voodoo Banshee graphics accelerator> at 0.0 irq 11
chip1: <AcerLabs M15x3 Power Management Unit> at device 3.0 on pci0
isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
dc0: <Intel 21143 10/100BaseTX> port 0xb800-0xb87f mem 0xdd000000-0xdd00007f
irq 9 at device 9.0 on pci0
dc0: Ethernet address: 00:00:f8:09:34:80
miibus0: <MII bus> on dc0
dcphy0: <Intel 21143 NWAY media interface> on miibus0
dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: supplying EUI64: 00:00:f8:ff:fe:09:34:80
dc1: <82c169 PNIC 10/100BaseTX> port 0xb400-0xb4ff mem 0xdc800000-0xdc8000ff
irq 12 at device 10.0 on pci0
dc1: Ethernet address: 00:a0:cc:5d:6c:d0
miibus1: <MII bus> on dc1
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci0: <AcerLabs Aladdin ATA33 controller> port 0xb000-0xb00f irq 0 at
device 15.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/7 bytes threshold
ppi0: <Parallel I/O> on ppbus0
ppi0: can't allocate irq
device_probe_and_attach: ppi0 attach returned 12
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
unknown: <PNP0401> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0700> can't assign resources
unknown0: <PNP0c01> at iomem
0-0x9ffff,0x100000-0x7ffffff,0xe8000-0xeffff,0xf0000-0xf3fff,0xf4000-0xf7fff,0xf8000-0xfbfff,0xfc000-0xfffff,0xfffe0000-0xffffffff
on isa0
unknown: <PNP0000> can't assign resources
unknown1: <PNP0100> at port 0x40-0x43 irq 0 on isa0
unknown2: <PNP0b00> at port 0x70-0x71 irq 8 on isa0
unknown: <PNP0303> can't assign resources
unknown3: <PNP0c04> at port 0xf0 irq 13 on isa0
unknown4: <PNP0200> at port 0-0xf,0x80-0x90,0x94-0x9f,0xc0-0xde drq 4 on
isa0
unknown5: <PNP0800> at port 0x61 on isa0
unknown6: <PNP0a03> at port 0xcf8-0xcff on isa0
unknown7: <PNP0c02> at port
0x290-0x297,0x40b,0x480-0x49f,0x4d6,0xec00-0xec3f,0xe800-0xe83f on isa0
esscontrol0: <ESS Control> at port 0x800-0x807 on isa0
sbc1: <ESS ES1869> at port 0x220-0x22f,0x388-0x38b,0x330-0x331 irq 5 drq 1,0
on isa0
pcm0: <ESS 18xx DSP> on sbc1
unknown8: <ESS ES1869 Plug and Play AudioDrive> at port 0x201 on isa0
IP packet filtering initialized, divert enabled, rule-based forwarding
enabled, default to accept, logging limited to 100 packets/entry by default
DUMMYNET initialized (000106)
IPv6 packet filtering initialized, default to accept, logging limited to 100
packets/entry
IP Filter: initialized. Default = pass all, Logging = enabled
IP Filter: v3.3.8
ad0: 8063MB <Maxtor 90845D4> [16383/16/63] at ata0-master using UDMA33
ad1: 6149MB <QUANTUM FIREBALL CX6.4A> [13328/15/63] at ata0-slave using
UDMA33
acd0: CDROM <ATAPI 40X CDROM> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s1a
dc0: starting DAD for fe80:0001::0200:f8ff:fe09:3480
dc1: starting DAD for fe80:0002::02a0:ccff:fe5d:6cd0
dc0: DAD complete for fe80:0001::0200:f8ff:fe09:3480 - no duplicates found
WARNING: run /dev/MAKEDEV before 2000-06-01 to get rid of block devices
dc1: DAD complete for fe80:0002::02a0:ccff:fe5d:6cd0 - no duplicates found
pid 174 (ldconfig), uid 0: exited on signal 11 (core dumped)
microuptime() went backwards (53234.680005 -> 53234,-694706140)
microuptime() went backwards (55336.561761 -> 55336,-694824432)
Here's my kernel:
#
# $FreeBSD: src/sys/i386/conf/MATRIX,v 1.251 2000/04/17 06:48:43 Kareem Exp
$
machine i386
cpu I386_CPU
cpu I486_CPU
cpu I586_CPU
cpu I686_CPU
ident MATRIX
maxusers 64
makeoptions DEBUG=-g #Build kernel with gdb(1) debug
symbols
options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep
this!]
options MFS #Memory Filesystem
options MD_ROOT #MD is a potential root device
options NFS #Network Filesystem
options NFS_ROOT #NFS usable as root device, NFS
required
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options CD9660_ROOT #CD-ROM usable as root, CD9660
required
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP
THIS!]
options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extentions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
options PNPBIOS
# ADDED opts
options VESA
options CPU_WT_ALLOC
options TCP_COMPAT_42 #emulate 4.2BSD TCP bugs
options MROUTING # Multicast routing
options IPFIREWALL #firewall
options IPFIREWALL_VERBOSE #print information about
# dropped packets
options IPFIREWALL_FORWARD #enable transparent proxy support
options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity
options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by default
options IPV6FIREWALL #firewall for IPv6
options IPV6FIREWALL_VERBOSE
options IPV6FIREWALL_VERBOSE_LIMIT=100
options IPV6FIREWALL_DEFAULT_TO_ACCEPT
options IPDIVERT #divert sockets
options IPFILTER #ipfilter support
options IPFILTER_LOG #ipfilter logging
options IPSTEALTH #support for stealth forwarding
options TCPDEBUG
options COMPAT_SVR4 # build emulator statically
#options DEBUG_SVR4 # enable verbose debugging
pseudo-device streams # STREAMS network driver (required for
svr4).
options DUMMYNET
options USER_LDT #allow user-level control of i386
ldt
# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
#options APIC_IO # Symmetric (APIC) I/O
# Optionally these may need tweaked, (defaults shown):
#options NCPU=2 # number of CPUs
#options NBUS=4 # number of busses
#options NAPIC=1 # number of IO APICs
#options NINTR=24 # number of INTs
device pcm
device isa
device eisa
device pci
options COMPAT_OLDISA # Old ISA driver shims
options COMPAT_OLDPCI # Old PCI driver shims
# sound opts
device sbc0 at isa? port 0x220 irq 5 drq 1 flags 0x15
#device snd
#device pas0 at isa? port 0x388 irq 10 drq 6
#device sb0 at isa? port 0x220 irq 5 drq 1
#device sbxvi0 at isa? drq 5
#device sbmidi0 at isa? port 0x330
#device awe0 at isa? port 0x620
#device gus0 at isa? port 0x220 irq 12 drq 1
##device gus0 at isa? port 0x220 irq 12 drq 1 flags 0x3
#device mss0 at isa? port 0x530 irq 10 drq 1
#device css0 at isa? port 0x534 irq 5 drq 1 flags 0x08
#device sscape0 at isa? port 0x330 irq 9 drq 0
#device trix0 at isa? port 0x330 irq 6 drq 0
#device sscape_mss0 at isa? port 0x534 irq 5 drq 1
#device opl0 at isa? port 0x388
#device mpu0 at isa? port 0x330 irq 6 drq 0
#device uart0 at isa? port 0x330 irq 5
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device fd1 at fdc0 drive 1
# ATA and ATAPI devices
device ata0 at isa? port IO_WD1 irq 14
device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
#options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1
device psm0 at atkbdc? irq 12
device vga0 at isa?
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa?
options SC_NORM_ATTR="(FG_LIGHTBLUE |BG_BLACK)"
#options SC_NORM_REV_ATTR="(FG_BLACK|BG_LIGHTBLUE)"
#options SC_KERNEL_CONS_ATTR="(FG_LIGHTRED |BG_BLACK)"
#options SC_KERNEL_CONS_REV_ATTR="(FG_BLACK|BG_LIGHTRED)"
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# Power management support (see LINT for more options)
device apm0 at nexus? disable flags 0x20 # Advanced Power
Management
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
device sio2 at isa? disable port IO_COM3 irq 5
device sio3 at isa? disable port IO_COM4 irq 9
# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# PCI Ethernet NICs.
device de # DEC/Intel DC21x4x (``Tulip'')
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
device tx # SMC 9432TX (83c170 ``EPIC'')
device vx # 3Com 3c590, 3c595 (``Vortex'')
device wx # Intel Gigabit Ethernet Card (``Wiseman'')
# PCI Ethernet NICs that use the common MII bus controller code.
device miibus # MII bus support
device dc # DEC/Intel 21143 and various workalikes
device rl # RealTek 8129/8139
device sf # Adaptec AIC-6915 (``Starfire'')
device sis # Silicon Integrated Systems SiS 900/SiS
7016
device ste # Sundance ST201 (D-Link DFE-550TX)
device tl # Texas Instruments ThunderLAN
device vr # VIA Rhine, Rhine II
device wb # Winbond W89C840F
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# Pseudo devices - the number indicates how many units to allocated.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device sl 1 # Kernel SLIP
pseudo-device ppp 1 # Kernel PPP
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
pseudo-device gif 4 # IPv6 and IPv4 tunneling
pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf # Berkeley packet filter
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
