2014/1/6 Hans Petter Selasky <h...@bitfrost.no> > On 01/06/14 10:41, Huang Wen Hui wrote: > >> % grep xhci dmesg-xhci-debug.txt | more >> xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xc1e00000-0xc1e0ffff at >> device 20.0 on pci0 >> xhci0: attempting to allocate 1 MSI vectors (8 supported) >> xhci0: using IRQ 266 for MSI >> xhci0: MSI enabled >> > > Those USB timeouts are most likely due to port routing not working > properly. It is because intel did something special to their lynx point > series. > > Try to set : > > hw.usb.xhci.xhci_port_route = "-1" > > in /boot/loader.conf
Try this before, hw.usb.xhci.xhci_port_route = "-1" make almost of all usb devices not found. external mouse seems to no power at all. # usbconfig list ugen0.1: <XHCI root HUB 0x8086> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA) ugen0.2: <product 0x8406 vendor 0x05ac> at usbus0, cfg=255 md=HOST spd=SUPER (5.0Gbps) pwr=ON (100mA) > > --HPS > _______________________________________________ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
