At 2:50 PM -0500 2000/3/22, Forrest Aldrich wrote:
> da4 at ahc0 bus 0 target 1 lun 0
> da4: <QUANTUM ATLAS 10K 36SCA UCHD> Fixed Direct Access SCSI-3 device
> da4: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged
>Queueing Enabled
> da4: 34732MB (71132998 512 byte sectors: 255H 63S/T 4427C)
This just says "ahc0", which doesn't tell us if it's the on-board
AIC-7890 controller, or a Adaptec 2940U2W controller that has been
added. I suspect he wants more details about what ahc0 is.
That said, I've got no problems with 4.0-STABLE (cvsup'ed within
the last two or three days) on a Dell 1300/450 SMP with an on-board
AIC-7890 and two additional Adaptec 2940U2W controllers, at least not
with /stand/sysinstall claiming they don't exist. I've got some
weird SCSI errors under stress that I haven't yet been able to pin
down, but the OS recognizes that the drives are there and I was able
to disklabel them, etc....
--
These are my opinions -- not to be taken as official Skynet policy
======================================================================
Brad Knowles, <[EMAIL PROTECTED]> || Belgacom Skynet SA/NV
Systems Architect, Mail/News/FTP/Proxy Admin || Rue Colonel Bourg, 124
Phone/Fax: +32-2-706.13.11/12.49 || B-1140 Brussels
http://www.skynet.be || Belgium
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
