As Gianmarco Giovannelli wrote ... > > In 4.0-current sometimes the box will froze again after the : > "Waiting 3 seconds for SCSI devices to settle" > then nothing happens. > It was a thing happened also in early 1999, before the branch in > 4.0-current and 3.1 stable, if I remember well. > > Any others experience such behaviour ? > Here is again (part of) my infos: > > FreeBSD 4.0-CURRENT #0: Wed May 12 13:03:16 CEST 1999 > r...@gmarco.eclipse.org:/usr/src/sys/compile/GMARCO > Timecounter "i8254" frequency 1193182 Hz > Timecounter "TSC" frequency 400911064 Hz > CPU: Pentium II/Xeon/Celeron (400.91-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x651 Stepping=1 > Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV, > PAT,PSE36,MMX,FXSR> > real memory = 134217728 (131072K bytes) > avail memory = 127868928 (124872K bytes) > Preloaded elf kernel "kernel" at 0xc02ae000. > Pentium Pro MTRR support enabled, default memory type is uncacheable > Probing for PnP devices: > pcib0: <PCI host bus adapter> on motherboard > pci0: <PCI bus> on pcib0 > chip0: <Intel 82443BX host to PCI bridge> at device 0.0 on pci0 > pcib1: <PCI to PCI bridge (vendor=8086 device=7191)> at device 1.0 on pci0 > pci1: <PCI bus> on pcib1 > vga-pci0: <VGA-compatible display device> irq 11 at device 0.0 on pci1 > isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0 > chip1: <Intel PIIX4 IDE controller> at device 4.1 on pci0 > chip2: <Intel 82371AB Power management controller> at device 4.3 on pci0 > ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> irq 14 at device 6.0 on pci0 > ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs > [...] > Waiting 3 seconds for SCSI devices to settle > sa0 at ahc0 bus 0 target 6 lun 0 > sa0: <TANDBERG TDC 3500 =01:> Removable Sequential Access SCSI-2 device > sa0: 3.300MB/s transfers > changing root device to da0s1a > da2 at ahc0 bus 0 target 2 lun 0 > da2: <IOMEGA ZIP 100 E.08> Removable Direct Access SCSI-2 device
Have you tried this without the ZIP drive? I've heared from people they sometimes cause grief. Groeten / Cheers, | / o / / _ Arnhem, The Netherlands - Powered by FreeBSD - |/|/ / / /( (_) Bulte WWW : http://www.tcja.nl http://www.freebsd.org To Unsubscribe: send mail to majord...@freebsd.org with "unsubscribe freebsd-current" in the body of the message
