> ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> irq 14 at device 6.0 on pci0 > ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs > [...] > Waiting 3 seconds for SCSI devices to settle > sa0 at ahc0 bus 0 target 6 lun 0 > sa0: <TANDBERG TDC 3500 =01:> Removable Sequential Access SCSI-2 device > sa0: 3.300MB/s transfers > changing root device to da0s1a > da2 at ahc0 bus 0 target 2 lun 0 > da2: <IOMEGA ZIP 100 E.08> Removable Direct Access SCSI-2 device > da2: 3.300MB/s transfers > da2: Attempt to query device size failed: NOT READY, Medium not present > da0 at ahc0 bus 0 target 0 lun 0 > da0: <IBM DDRS-34560D DC1B> Fixed Direct Access SCSI-2 device > da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing > Enabled > da0: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C) > da1 at ahc0 bus 0 target 1 lun 0 > da1: <IBM DDRS-34560D DC1B> Fixed Direct Access SCSI-2 device > da1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing > Enabled > da1: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C)
you've got two Ultra mode devices (disks) on the same bus as a Async mode device (the tape drive). In theory it's possible to mix Ultra and non-ultra devices and I have certainly done so, but you might want to try your setup without the tape drive attached. -matt To Unsubscribe: send mail to majord...@freebsd.org with "unsubscribe freebsd-current" in the body of the message
