Every attempt to kldload any pci driver produce strange message
marked by ^^^^ in examples from two different computers.
I would call it for a while "undocumented feature".
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #1: Wed Jan 19 21:48:46 MSK 2000
nms@Draculina:/xtra/src/sys/compile/DRACULINA
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P55C (233.86-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping = 3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 33554432 (32768K bytes)
avail memory = 30162944 (29456K bytes)
Preloaded elf kernel "kernel" at 0xc027b000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc027b09c.
Intel Pentium detected, installing workaround for F00F bug
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: Intel PIIX3 ATA controller (vendor=0x8086, dev=0x7010) at 7.1
bt0: <Buslogic Multi-Master SCSI Host Adapter> port 0x6400-0x6403 irq 15 at device 8.0
on pci0
bt0: BT-946C FW Rev. 4.25J Narrow SCSI Host Adapter, SCSI ID 7, 100 CCBs
vga-pci0: <S3 ViRGE DX/GX graphics accelerator> mem 0xe0000000-0xe3ffffff irq 11 at
device 9.0 on pci0
de0: <Digital 21140 Fast Ethernet> port 0x6800-0x687f mem 0xe4000000-0xe400007f irq 10
at device 10.0 on pci0
de0: SMC 9332DST 21140 [10-100Mb/s] pass 1.2
de0: address 00:00:c0:e0:9e:d0
de0: enabling 10baseT port
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0x6c00-0x6c7f mem 0xe4001000-0xe400107f
irq 12 at device 11.0 on pci0
xl0: Ethernet address: 00:50:04:4c:ae:5d
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppc1: <Parallel port> at port 0x278-0x27f irq 5 on isa0
ppc1: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
IP packet filtering initialized, divert enabled, rule-based forwarding disabled,
logging disabled
Waiting 3 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da0 at bt0 bus 0 target 0 lun 0
da0: <FUJITSU M1606S-512 6226> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da0: 1041MB (2131992 512 byte sectors: 128H 32S/T 520C)
da1 at bt0 bus 0 target 1 lun 0
da1: <CONNER CFP2107E 2.14GB 1524> Fixed Direct Access SCSI-2 device
da1: 10.000MB/s transfers (10.000MHz, offset 15)
da1: 2048MB (4194304 512 byte sectors: 255H 63S/T 261C)
da2 at bt0 bus 0 target 2 lun 0
da2: <CONNER CFP2107E 2.14GB 1524> Fixed Direct Access SCSI-2 device
da2: 10.000MB/s transfers (10.000MHz, offset 15)
da2: 2048MB (4194304 512 byte sectors: 255H 63S/T 261C)
vinum: loaded
vinum: reading configuration from /dev/da1s1e
vinum: updating configuration from /dev/da2s1e
de0: enabling Full Duplex 10baseT port
pci0: Intel PIIX3 ATA controller (vendor=0x8086, dev=0x7010) at 7.1
^^^^^^
pci0: Intel PIIX3 ATA controller (vendor=0x8086, dev=0x7010) at 7.1
^^^^^^
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #1: Tue Feb 8 15:24:28 MSK 2000
root@Manor:/usr/src/sys/compile/MANOR
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (334.09-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x660 Stepping = 0
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 67096576 (65524K bytes)
avail memory = 62672896 (61204K bytes)
Preloaded elf kernel "kernel" at 0xc024d000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc024d09c.
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
ata-pci0: <Intel PIIX4 ATA-33 controller> port 0xd800-0xd80f at device 4.1 on pci0
ata0 at 0x01f0 irq 14 on ata-pci0
ata1 at 0x0170 irq 15 on ata-pci0
pci0: Intel 82371AB/EB (PIIX4) USB controller (vendor=0x8086, dev=0x7112) at 4.2 irq 5
chip1: <Intel 82371AB Power management controller> port 0xe800-0xe80f at device 4.3 on
pci0
vga-pci0: <S3 ViRGE graphics accelerator> mem 0xc8000000-0xcbffffff irq 12 at device
10.0 on pci0
pci0: unknown card (vendor=0x108d, dev=0x0008) at 11.0 irq 10
pci0: unknown card (vendor=0x10b7, dev=0x9050) at 12.0 irq 11
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
IP packet filtering initialized, divert enabled, rule-based forwarding disabled,
logging disabled
ad0: 4125MB <FUJITSU MPD3043AT> [8940/15/63] at ata0-master using UDMA33
ad1: 19470MB <IBM-DJNA-352030> [39560/16/63] at ata1-master using UDMA33
acd0: CDROM <40X CD-ROM> at ata0-slave using PIO4
Mounting root from ufs:/dev/ad0a
pci0: Intel 82371AB/EB (PIIX4) USB controller (vendor=0x8086, dev=0x7112) at 4.2 irq 5
^^^^^^
pci0: unknown card (vendor=0x108d, dev=0x0008) at 11.0 irq 10
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xb800-0xb83f irq 11 at device 12.0 on pci0
xl0: Ethernet address: 00:00:62:a1:61:20
miibus0: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: Intel 82371AB/EB (PIIX4) USB controller (vendor=0x8086, dev=0x7112) at 4.2 irq 5
^^^^^^
ol0: <Olicom RapidFire 3540 100/16/4 Adapter (OC-3540)> port 0xd000-0xd03f mem
0xc7800000-0xc7803fff irq 10 at device 11.0 on pci0
ol0: MAC address 00:00:83:16:d1:bd
ol0: adapter self-test complete (status=0)
pci0: Intel 82371AB/EB (PIIX4) USB controller (vendor=0x8086, dev=0x7112) at 4.2 irq 5
^^^^^^
pci0: Intel 82371AB/EB (PIIX4) USB controller (vendor=0x8086, dev=0x7112) at 4.2 irq 5
^^^^^^
pci0: Intel 82371AB/EB (PIIX4) USB controller (vendor=0x8086, dev=0x7112) at 4.2 irq 5
^^^^^^
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
