On Sunday 18 November 2001 05:26, you wrote: > I have tried most of the gimp print drivers as well as downloaded > turboprint. Still does it. Problem seems to be in cups, but a grep of > the disk shows those strings in libgimpprint.so. I am lost as its a > real pain. I think I'll try a forced reinstall of all the cups rpm's > and see if that corrects it, as it seems no one else is having thsese > problems. > > BillK > > On Sun, 2001-11-18 at 16:03, David E. Fox wrote: > > > The drivers I have tried either dont work, or print 4 lines of ascii on > > > a separate page as well as the page I want to print. I cannot find any > > > > Have you tried different bjc drivers? > > > > Currently I have a bjc-250. I'm using the bj200 driver for now with foo- > > matic. Works fine, I don't print in color - just have b&w ink cartridges. > > Color has worked in the past with bjc800 and other drivers, but the > > results haven't been stellar. Mostly, the image prints too darkly. > > > > > BillK > > > > ------------------------------------------------------------------------ > > David E. Fox Thanks for letting me > > [EMAIL PROTECTED] change magnetic patterns > > [EMAIL PROTECTED] on your hard disk. > > ----------------------------------------------------------------------- > > > > ---- > > > > > > This message has been 'sanitized'. This means that potentially > > dangerous content has been rewritten or removed. The following > > log describes which actions were taken. > > > > Sanitizer (start="1006071160"): > > Part (pos="2641"): > > SanitizeFile (filename="unnamed.txt", mimetype="text/plain"): > > Match (rule="2"): > > Enforced policy: accept > > > > Part (pos="3571"): > > SanitizeFile (filename="message.footer", mimetype="text/plain"): > > Match (rule="default"): > > Enforced policy: defang > > > > Replaced mime type with: application/DEFANGED-81506 > > Replaced file name with: message_footer.DEFANGED-81506 > > > > Total modifications so far: 1 > > > > > > Anomy 0.0.0 : Sanitizer.pm > > $Id: Sanitizer.pm,v 1.32 2001/10/11 19:27:15 bre Exp $
Just an additional thought, Bill. On both my HP 4000 and Canon S450, I had a somewhat similar problem. When I first loaded cups in the install, and I asked for a test print, sometimes (2 out of 6 tries) I would get a blank page printout for the first sheet, and then the regular printout. The HP 4000's control panel indicated that it was printing from root, whereas the true test page came from /home/andre. I never bothered to track this down until I had problems with the Canon jamming on a job. I took forever to erase the print queue. I finally found a method that corrected my first problem (that extra page) and the job-jamming. Using Kups-CUPS Administrator, I entered "Properties" and "changed" (actually reset the same driver. Solved both problems. Might be worth a try - for my part, I can't understand why these oddball things happen, but that was an acceptable workaround for me. (Of course, each time it happened I would have to re-discover how I fixed it. Finally, I wrote it down in my fix-up booklet!) HTH, Andre -- Please pray the Holy Rosary to end the holocaust of abortion and terrorism. For a free Cenacle Scriptural Rosary Booklet -- http://www.webhart.net/csrb/
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
