In the past, I simply fabricated my own using suitable diameter copper
crimp sleeves (or shot sections of copper pipe) and layers of ~3/4 inch
copper braid. Press (or hammer, the crimps flat on the ends. Then drill
or punch the holes in the copper ends.
Here is a source for copper braid:
https://www.mcmaster.com/products/grounding-straps/braided-grounding-straps~~/
Bill D.
On 5/2/2025 12:00 AM, Pestka Dennis via EV wrote:
Looking to purchase (30) of the Braided Copper Battery Straps to tie the CALB
180 Cells side to side. Center to center dimension is 76MM.
Does anyone have these or name of a supplier.
EVTV has the 70MM but no 76MM.
Thanks;
Dennis
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20250501/7890a63f/attachment.htm>
_______________________________________________
Address messages to [email protected]
No other addresses in TO and CC fields
HELP: http://www.evdl.org/help/
_______________________________________________
Address messages to [email protected]
No other addresses in TO and CC fields
HELP: http://www.evdl.org/help/
