>I don't think you get much from 3.3 to 3.6....
During testing, I took them down to 2.9v per cell, but you're right,
after about 3.4v, there really isn't much left. I was running two
modules in series feeding a Trace DR series inverter and using a 600W
space heater for a load. The inverter insured that the power of the
load was constant over the range of terminal voltages. 600W at 11.6v
is about 52 amps, so when they got tired, the end came fast.
I have a 2p5s setup in my Electrak, for a nominal pack voltage of 38v
or so. It stays around 38-39 volts for quite a while during mowing,
but when I see the meter get down to 37 volts or so, it's time to
shut down the accessories and head for the barn for a charge.
____________________________________________________________
Sponsored by
https://www.newser.com/?utm_source=part&utm_medium=uol&utm_campaign=rss_taglines_more
In First Solo Dissent, Roberts Warns About 'Fighting Over Farthings'
http://thirdpartyoffers.juno.com/TGL3131/604802c5267d92ba6a0dst03duc1
Buckingham Palace Breaks Silence After Interview
http://thirdpartyoffers.juno.com/TGL3131/604802c549d0e2ba6a0dst03duc2
Nun Kneels Before Troops: 'Shoot Me Instead'
http://thirdpartyoffers.juno.com/TGL3131/604802c56e62e2ba6a0dst03duc3
_______________________________________________
UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
ARCHIVE: http://www.evdl.org/archive/
LIST INFO: http://lists.evdl.org/listinfo.cgi/ev-evdl.org
