Henkel - LocTite phase change materials are better than grease.
<http://www.henkel-adhesives.com/thermal-management-materials-45894.htm>

At 10:01 AM 2/26/2017, paul dove via EV wrote:
http://www.digikey.com/catalog/en/partgroup/thermal-grease-and-compounds/1206

Sent from my iPhone

> On Feb 25, 2017, at 9:29 PM, Jay Summet via EV <[email protected]> wrote:
>
> I'm working on replacing the diodes and MOSFETS in a Curtis 1231c, and need an electrically and thermally conductive heat transfer compound to put between the MOSFET's/Diodes and the heatsync they attach to.
>
> They are mechanically attached with screws, so I think a grease would be fine and I don't need an adhesive.
>
> It's an aluminum heatsync if that matters.
>
> Suggestions I could source from digikey preferred.
>
> Also, I need to mechanically stabalize my capacitors. I'm thinking of using a high temp silicon, as what was on the pre-existing capacitors looks a lot like cured silicon, but if you have any suggestions for stabilization/potting I'm interested in hearing options.
>
> Thanks,
> Jay
> _______________________________________________
> UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
> http://lists.evdl.org/listinfo.cgi/ev-evdl.org
> Read EVAngel's EV News at http://evdl.org/evln/
> Please discuss EV drag racing at NEDRA (http://groups.yahoo.com/group/NEDRA)
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20170226/d392ca5a/attachment.htm>
_______________________________________________
UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
http://lists.evdl.org/listinfo.cgi/ev-evdl.org
Read EVAngel's EV News at http://evdl.org/evln/
Please discuss EV drag racing at NEDRA (http://groups.yahoo.com/group/NEDRA)

_______________________________________________
UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
http://lists.evdl.org/listinfo.cgi/ev-evdl.org
Read EVAngel's EV News at http://evdl.org/evln/
Please discuss EV drag racing at NEDRA (http://groups.yahoo.com/group/NEDRA)

Reply via email to