If there is a platting house nearby, they won't charge much for a basket of copper bits. Could be far less trouble than manual tinning. Nickel might be better choice in that case. Of a flash of nickel under the tin. I would do tin/lead dip if I was not concerned about ROHS and had a plater still working with that. It is a much better coating in so many ways. If you could find an old solder pot (for tinning leads and such) you could do that yourself for smaller parts.
On Mon, Sep 22, 2014 at 3:06 PM, EVDL Administrator via EV < ev@lists.evdl.org> wrote: > On 22 Sep 2014 at 7:55, Roland via EV wrote: > > > You can get the plated copper bus bars in long lengths and cut them to > size. > > You will note that the cut ends will show copper. In wet locations, coat > > these cut ends with silver paint or epoxy silver paint. > > Why not tin them with solder? I would think that that would bond and > protect better. > > David Roden - Akron, Ohio, USA > EVDL Administrator > > = = = = = = = = = = = = = = = = = = = = = = = = = = = = = > EVDL Information: http://www.evdl.org/help/ > = = = = = = = = = = = = = = = = = = = = = = = = = = = = = > Note: mail sent to "evpost" and "etpost" addresses will not > reach me. To send a private message, please obtain my > email address from the webpage http://www.evdl.org/help/ . > = = = = = = = = = = = = = = = = = = = = = = = = = = = = = > > > _______________________________________________ > UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub > http://lists.evdl.org/listinfo.cgi/ev-evdl.org > For EV drag racing discussion, please use NEDRA ( > http://groups.yahoo.com/group/NEDRA) > > -- Put this question to yourself: should I use everyone else to attain happiness, or should I help others gain happiness? *Dalai Lama * Tell me what it is you plan to do With your one wild and precious life? Mary Oliver, "The summer day." To invent, you need a good imagination and a pile of junk. Thomas A. Edison <http://www.brainyquote.com/quotes/quotes/t/thomasaed125362.html> A public-opinion poll is no substitute for thought. *Warren Buffet* Michael E. Ross (919) 550-2430 Land (919) 576-0824 <https://www.google.com/voice/b/0?pli=1#phones> Google Phone (919) 631-1451 Cell (919) 513-0418 Desk michael.e.r...@gmail.com <michael.e.r...@gmail.com> -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20140922/6886f70e/attachment.htm> _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org For EV drag racing discussion, please use NEDRA (http://groups.yahoo.com/group/NEDRA)
