> From: Lee Hart via EV <[email protected]> > > You can measure the resistance of the connections without taking them > apart... All you need is a normal multimeter and a source of a known > current (like your charger)... The technique has been described many times on > the EVDL...
Pump a fixed known current through the battery, and measure the voltage drop between the terminal and the post. Set your DVM to the lowest range, where you can measure millivolts. If you pump the current through your entire pack, you can quickly move post-to-post, checking them all. Call out the millivolt drop to an assistant for recording. :::: Nothing wastes more energy than worrying. The longer one carries a problem, the heavier it gets. Don't take things too seriously. Live a life of serenity, not a life of regrets. -- Douglass Pagels :::: Jan Steinman, EcoReality Co-op :::: _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org For EV drag racing discussion, please use NEDRA (http://groups.yahoo.com/group/NEDRA)
