piektd., 2026. g. 20. nov., plkst. 02:03 — lietotājs Rene Hopf via Emc-users (<[email protected]>) rakstīja: > > try master, you are using large pocket numbers, which is broken in 2.9. > I have retrofited a machine like yours, and I did the toolchanger > entirely in HAL, and XY offsets in the tooltable: > https://github.com/rene-dev/linuxcnc-configs/blob/master/maw/tools.comp >
Just a little note - this is not the first retrofit where I remap M6 to ngc routine and it worked correctly previously (this config actually is adjusted copy from previous retrofit, tool no 999 in tool table actually was on previous machine). The only difference is that previously there were tool posts under cover on the side of work area, now there is a 7-seat servo-driven rotating plate that holds the tools (principle looks like this: https://miro.medium.com/v2/resize:fit:1200/0*5i_2tyGusjS-lnVa.jpg). I looked at your component and it seems to me that it selects first spindle when T26 is required and selects second spindle when T27 is selected. Is that correct? If so, it seems that this component will not handle changing between several tools in (usually first if there are multiple) spindle. Anyways, is it really likely that some glitch with pocket numbers would give an error while loading a file but still execute the same command in MDI? Are they parsed through different components or something like that? I do not know the internals in that much detail. Viesturs _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
