I am sorry but I think I do not understand what you mean. ceturtd., 2026. g. 19. nov., plkst. 17:48 — lietotājs andy pugh (<[email protected]>) rakstīja:. > > Does the execution of the remap routine fall off the end of the > routine in the case of those two tool numbers? >
IMHO the fact that the command runs correctly in MDI tells me that those routines are defined correctly. Anyways, here is the main file: tool_change.ngc https://pastebin.com/TWXAzFcL Here is the routine that unloads current tool: tool_put_move.ngc: https://pastebin.com/gkYMbez2 Here is the routine that loads new tool: tool_get_move.ngc: https://pastebin.com/wGiZH68c > > Is there anything special about them? A specific alternate toolhead, > for example? > First 7 tools are on a servo-driven carousel that is engaged with spindle by pneumatic cylinder. Tools 51-82 are drills that are on a separate gang-drill block - driven all together by motor and just extended to working position with pneumatic actuator, something like this (you can seem main spindle on the edge of picture): https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcTYOTbF55C322qtjtLB5onQ9r2XyTjfCcEXDh66wM6SZA&s=10 Let me know if you want to see the config as well. Viesturs _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
