piektd., 2025. g. 29. aug., plkst. 21:56 — lietotājs andy pugh (<bodge...@gmail.com>) rakstīja: > > On Fri, 29 Aug 2025 at 15:06, andy pugh <bodge...@gmail.com> wrote: > > > https://www.youtube.com/watch?v=ZwHoy4WMQXc ? > > If it is, then there is a hint that it might not be LinuxCNC at 7:01, > as it suggests bug reports to hankecnc > > Probably: https://github.com/hankecnc > > Though the preview looks very LinuxCNC. >
Since he is speaking russian and I could not get any subtitles, I suspect that vast majority of list members will not understand anything, here are main points that I noticed: At 4:04 the guy says: "based on description, it should have LinuxCNC inside" At 14:30 docs show that g-code must comply with LinuxCNC standards At 19:10 he says this is much better than Mach - he is happy about step pulse duration and how stable it is At 20:07 he says that he did a little reading and research - main board is running ARM and that I/O board has STM chip running Remora Viesturs _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
