While your design is very simple and robust, it's lack of adjustability seems like it would be a bit of a problem. This design by using button head screw heads for the contacts allows for very simple adjustability for leveling or concentricity. I merely have the screws threaded into holes printed and taped into the plastic. And the plastic holds the screws tight enough to not require any nuts. I also didn't even bother with soldering anything, simply stuck the fine stranded wire into the screw holes before running in the screws. I can adjust the level/concentrisity by changing the height of the screws.
Todd Zuercher P. Graham Dunn Inc.<http://www.pgrahamdunn.com/index.php> 630 Henry Street Dalton, Ohio 44618 Phone: (330)828-2105ext. 2031 From: andy pugh <[email protected]> Sent: Tuesday, May 21, 2024 9:11 AM To: Enhanced Machine Controller (EMC) <[email protected]> Cc: Todd Zuercher <[email protected]> Subject: Re: [Emc-users] Tool length probe [EXTERNAL EMAIL] Be sure links are safe. On Tue, 21 May 2024 at 13:37, Todd Zuercher via Emc-users <[email protected]<mailto:[email protected]>> wrote: Don't know about that one. But I did 3d print one that seems like it will work pretty well. My design has been successfully 3D printed too: https://youtu.be/2ia1_NKQJKs -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." - George Fitch, Atlanta Constitution Newspaper, 1912 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
