Le dim. 3 janv. 2021 à 16:15, Gene Heskett <[email protected]> a écrit :
> ... > That's a step in the right direction, but now I have to learn all the new > settings. If you talk about the added fields in QtPyVCP tool table, they add themselve to the standard ones so just an update. If you mean setting up a QtPyVCP control panel like Probe Basic, and if you ask me, that may reveal being a very well invested time! But, on closer inspection, I don't see anything that looks > like it could be hijacked for XY offsets. TLO can take care of Z but > still need an X and Y offset, two more vars. The additionnal fields are user configurable so all may not be lost... My thoughts are to construct a probe to detect the depth of a hole to be > tapped, so a g33.1 could be made to have a hard limit to the depth the > tap is driven in. Ending the broken tap from hitting the bottom of the > hole forever. Sorry, may be too new to this or just not getting your use case, but I don't understand why properly measured/probed tools end with excalibured taps 🤔 But I think I see a way to turn the probe into a tool table entry, similar > to what could be done on the mill when using the camera for an edge locator. > Now I'm lost 😅 Isn't the probe already a record in the tool table. > Not sure about number of tools... > > Presently 1000, but that seems more than sufficient to me. The cost of QC > tool holders limits me to about 7 or 8 valid at any one time. Needed is > some sort of a gage to setup a std tool. On my todo list but a ways down > ATM. > An open hardware tool presetter project is definitely missing... Thanks for alerting me to the new tool table, Jérémie, I appreciate it. > Not wanting to hijack this thread further, please join the QtPyVCP channel to further discuss your need/project. @TurBoss there will surely answer all your questions about its proposed tool table. Take care and stay well. > So do you man 🙏 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
