Yes, Tool 1 has a new entry for X after running the posted gcode (unset offsets are not present). Note that this was tested using Tormach's PathPilot which is a thinly skinned version of LinuxCNC since I don't have a "real" version to try it on.
> -----Original Message----- > From: andy pugh [mailto:[email protected]] > Sent: Wednesday, February 13, 2019 7:41 AM > To: Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] G43 question > > On Wed, 13 Feb 2019 at 02:40, Ken Strauss <[email protected]> wrote: > > > > G43 appears to only apply the Z-offset from the tool table. > > That seems wrong, G43 should definitely also apply the XYABCUVW offsets > too. > > Do you see the new numbers for X appear in the actual tool table? > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > - George Fitch, Atlanta Constitution Newspaper, 1916 > > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
