I need a part milled reasonably quickly. Unfortunately we are a wood working shop and we just don't have any metal working machines. (not completely true we recently bought an old manual Bridgeport, but I have not had a chance to cnc it yet.)
I'm in Ohio, and the part I need is a mild steel adapter ring for the nose of a spindle. It is 6.5 inches (165mm) diameter, and 10mm thick, center hole is 96mm, and has two hole circles of 8 holes each. The outer circle is on a 155.5mm circle and is tapped for 6mm screws, the inner circle is offset to the outer one on a 115mm circle and is drilled and counter sunk for 6mm flat head screws. Seems like it would be a simple job for someone with a cnc mill set up for working with steel. If you have any interest in this little one off job, please email me a quote. Todd Zuercher P. Graham Dunn Inc.<http://www.pgrahamdunn.com/index.php> 630 Henry Street Dalton, Ohio 44618 Phone: (330)828-2105ext. 2031 ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
