Hi Stuart what is --Are you wanting to reverse the tool path of a .ngc-- .ngc ? what i want? i have a 3d solid model i can generate G&M code to machine it. no tool change will be used. just simple machining 3d solid model. Program will start from top and end on the bottom of the part.
Now, i want to convert this/generated G&M code in to G&M code that will start motion from the bottom of the part and end on the top of the part. it be very good if i also can move tool path inside of the part, and also to i can generate 2 tool path. why do i need that? i did install mig welder gun on my linuccnc machine. i did program 2 inch by 2 inch cubic model, and it is ok for what i need. thank you aram On Sat, Mar 10, 2018 at 4:06 PM, Stuart Stevenson <[email protected]> wrote: > Aram, > > What are you wanting exactly? Can you describe just what you want to see? > Most any CAM packages can generate code in whatever direction you want. > > Are you wanting to reverse the tool path of a .ngc file you didn't generate > with a CAM package? > > thanks > Stuart > > On Sat, Mar 10, 2018 at 1:20 PM, a k <[email protected]> wrote: > > > hi > > in there world of CAD CAM software, is there a software that can > generate G > > code path in reverse motion? > > Or is there small CAD CAM company that can add such capability? > > this is intricate capability for specialty use. > > in the big company one will be able to talk to sale or tech support. > > impossible to talk to software creating person /personal. > > > > thank you > > aram > > ------------------------------------------------------------ > > ------------------ > > Check out the vibrant tech community on one of the world's most > > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > > _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > -- > Addressee is the intended audience. > If you are not the addressee then my consent is not given for you to read > this email furthermore it is my wish you would close this without saving or > reading, and cease and desist from saving or opening my private > correspondence. > Thank you for honoring my wish. > ------------------------------------------------------------ > ------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
