Aram, What are you wanting exactly? Can you describe just what you want to see? Most any CAM packages can generate code in whatever direction you want.
Are you wanting to reverse the tool path of a .ngc file you didn't generate with a CAM package? thanks Stuart On Sat, Mar 10, 2018 at 1:20 PM, a k <[email protected]> wrote: > hi > in there world of CAD CAM software, is there a software that can generate G > code path in reverse motion? > Or is there small CAD CAM company that can add such capability? > this is intricate capability for specialty use. > in the big company one will be able to talk to sale or tech support. > impossible to talk to software creating person /personal. > > thank you > aram > ------------------------------------------------------------ > ------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > -- Addressee is the intended audience. If you are not the addressee then my consent is not given for you to read this email furthermore it is my wish you would close this without saving or reading, and cease and desist from saving or opening my private correspondence. Thank you for honoring my wish. ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
