On 1 November 2016 at 12:33, John Alexander Stewart <[email protected]> wrote: > The VFD suggests 10a external fuses, plus a line filter. I'm running this > on 240v, over here in North America.
I don't know what your standards are in the US, but as the lathe is "plug-in" equipment it may be that it doesn't matter. I tend to prefer MCBs to fuses. In the UK the domestic-wiring suppliers only go down to 3A, which may be too big for some equipment wiring. My 12V/60W power supplies ended up with 1A class D breakers from RS but even those were not slow enough for the PSU inrush current. For the input-side filter, search eBay for the "Rasmi" brand. Lots of different types and pretty inexpensive. -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1916 ------------------------------------------------------------------------------ Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today. http://sdm.link/xeonphi _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
