On 09/08/2015 06:30 PM, Jeshua Lacock wrote: > Greetings, > > I am trying to add a 4th axis to my USC from Pico Systems. My set of config > files is at: > > <http://3DTOPO.com/pico-univstep.tar.gz> > > I defined the new axis as W and set it up the way the other axes are setup as > far as I can tell. I didn’t set up the limit switches because I wasn’t sure > what pins to use. > > Anyhow, I can’t get Axis to launch with the W enabled. I get the error: > > Can not find -sec APPLICATIONS -var DELAY -num 1 > HAL: ERROR: duplicate component name 'inihal' > ini_hal_init: ERROR: hal_init() failed > HAL: ERROR: duplicate component name 'inihal' > ini_hal_init: ERROR: hal_init() failed > HAL: ERROR: duplicate component name 'inihal' > ini_hal_init: ERROR: hal_init() failed > HAL: ERROR: duplicate component name 'inihal' > ini_hal_init: ERROR: hal_init() failed > HAL: ERROR: duplicate component name 'inihal' > ini_hal_init: ERROR: hal_init() failed > A configuration error is preventing LinuxCNC from starting. > More information may be available when running from a terminal. > > I grepped around for ‘inihal’ but find no such term in my configs. Full error > log is here: > > <http://3DTOPO.com/wAxisErr.txt.gz>
inihal and ini_hal_init are in task. Maybe you have multiple instances of task running? Maybe from a previous run of linuxcnc that wasn't shut down properly? -- Sebastian Kuzminsky ------------------------------------------------------------------------------ Monitor Your Dynamic Infrastructure at Any Scale With Datadog! Get real-time metrics from all of your servers, apps and tools in one place. SourceForge users - Click here to start your Free Trial of Datadog now! http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
