Yesterday the A-axis on my hobbing setup ran away. It worked fine in XYZA mode where the A axis is calibrated in degrees and with Pgain = 2 Igain = 2
In Hobbing mode where it is calibrate 0-1 revolutions the Pgain is 400 and the Igain was 2 and it ran away. Setting the Igain to zero brought it back under control. The same was true for any non-zero Igain between 0.0000002 to 400. Which rather puzzled me. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT Develop your own process in accordance with the BPMN 2 standard Learn Process modeling best practices with Bonita BPM through live exercises http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_ source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
