On 3/13/2015 8:49 AM, Kirk Wallace wrote: > On 03/13/2015 08:45 AM, Kirk Wallace wrote: >> On 03/13/2015 08:16 AM, andy pugh wrote: >>> On 13 March 2015 at 15:09, craig <[email protected]> wrote: >>>> The connector has 10 pins. I haven't opened up things to find out how >>>> many are connected. >>> Buzzing-through with a multimeter might be instructive. >>> >>>> It also has an air hose going to the spindle. >>> Any idea if that is a drawbar release, or just for cooling? >> From this document on page 42 (P.23 of 25): >> http://www.nsk-nakanishi.co.jp/industrial-eng/hpms/e3000/e3000.pdf > Even better: > http://www.nsk-nakanishi.co.jp/industrial-eng/download/pdf/E3000_CONTROLLER_en.pdf > > Page 72 (P.27 of 51) > > Thanks Kirk for the reference, the controller doc is most useful. Enough info to begin thinking about building or buying a controller.
The one from Nakanishi at over $1000 is well out of my price range. Thanks also to John. from your suggested testing it is a 3 phase induction induction. The air line is for cooling 40psi filtered air needed at higher RPM. ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
