Sorry, work is pressing... I noticed the Subject says Gui3 and you downloaded Gui8? Which one are you working on?
I'll try and test with master this evening. JT On 2/7/2014 8:49 AM, Mark Tucker wrote: > Andy > > I tried as below and everything shows as False. > I have re-downloaded johns example files from > http://gnipsel.com/linuxcnc/gui/gui08a.html > I have re installed them and the gui shows fine but the power button is > greyed out which is exactly what my gui is doing. > > I have just altered back to axis using the same ini and hal file and > axis powers up no problem. > > On 07/02/14 14:12, andy pugh wrote: >> On 7 February 2014 13:57, Mark Tucker <[email protected]> wrote: >> >>> I had already changed the comment to your version but i still have the >>> same results. >>> Everything works fine with axis and Gscreen but it will not work with my >>> custom Gui. >> You probabl need to have a look at the machine status. I find it most >> convenient to open a terminal (ssh works too) and >> halcmd -kf >> show pin *machine* >> >> For example will show the status of machine-is-on etc. >> >> Does the button start active and de-activate? You might only need to >> set it to active in Glade. Or it might be being disabled by underlying >> Python code. >> > > ------------------------------------------------------------------------------ > Managing the Performance of Cloud-Based Applications > Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. > Read the Whitepaper. > http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
