-- www.fandemonium.org August (Fri) 2nd, (Sat) 3rd & (Sun) 5th, 2013
--- On Thu, 5/9/13, Eric Keller <[email protected]> wrote: > Gregg Eshelman <[email protected]> > wrote: > > > I'm looking for rollers, wheels or bearings with a > pointed edge to run in > > a slot, but all I find are V groove wheels made to run > along a pointed edge > > rail. > > > That's an interesting idea, and sounds familiar. > However, the existence > of Makerslide and similar extrusions makes me wonder if it > exists. Makerslide, Open Rail and various other "open" designs are 20 mm. I'm working with 40 mm extrusion. What would work is double edged V rail wide enough to work on 40 mm extrusion with a single slot on each side. Found a lot of single edge V rail but can only bolt one to each side unless you don't need the edges in the same plane. Open Rail solves that issue, but doesn't have a 40 mm version. It's slotted holes allow fitting to 20 or 25 mm extrusion. ------------------------------------------------------------------------------ Learn Graph Databases - Download FREE O'Reilly Book "Graph Databases" is the definitive new guide to graph databases and their applications. This 200-page book is written by three acclaimed leaders in the field. The early access version is available now. Download your free book today! http://p.sf.net/sfu/neotech_d2d_may _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
