On 7 May 2012 00:09, Jon Elson <[email protected]> wrote: > If you have a quick-change toolpost, you should be able to set up X and Z > offsets for each tool in the tool table.
My QC tool holder isn't spectacularly repeatable, So I generally stop 0.5mm oversize, measure, then make the final cut. I think that better holders are probably better. I have a cheap Dickson knock-off and it seems random which flats of the Vs are loaded. I suspect that a better one would be better, and I believe that the Multifix ones are better still (also, with a Multifix you have several possible angles to set tools at repeatedly. But, you definitely want to remove the compound slide. -- atp The idea that there is no such thing as objective truth is, quite simply, wrong. ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
