Viesturs Lācis wrote: > 2011/11/25 andy pugh <[email protected]>:> On 25 November 2011 18:11, > Viesturs Lācis <[email protected]> wrote:>>> Not sure I > understand about the operating mode. I suppose it has to do>> > something with this:>> loadrt bldc cfg=qh,qh,qh>> Oh, I did change the > h mode recently, though that was intended to make> the parport work > properly shouldn't have broken a Mesa config.> Which version of EMC2? > EMC 2.5 that was installed 7-8 weeks ago from buidlbot package. > > Does anyone remember that I had mysterious problem of getting 7i43 > card working with D525MW motherboard. The problem disappeared... > > Well, it is back... > My guess is this is the D525MW EPP problem. I assume you are using it in parallel port mode. The PPMC driver now correctly sets up the port in EPP mode, using the high address field. It does produce an error message, but does the right thing. Maybe the Mesa driver is not reliably setting the extended config register for this particular parallel port to EPP mode. You could try using my pcisetup program, and if it works after that, you will then know the port was not in EPP mode before. Download from : http://pico-systems.com/codes/pcisetup.tgz unpack with tar xzvf pcisetup.tgz and then run with sudo ./pcisetup 378
Jon Jon ------------------------------------------------------------------------------ All the data continuously generated in your IT infrastructure contains a definitive record of customers, application performance, security threats, fraudulent activity, and more. Splunk takes this data and makes sense of it. IT sense. And common sense. http://p.sf.net/sfu/splunk-novd2d _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
