On 22 October 2011 06:10, Bruce Klawiter <[email protected]> wrote: > If my ppmc.tbl file says that Tool 1, is D.100 and after I start EMC/Axis, I > either MDI T1M6 or the program does I can see that the tool information is > displayed in the Axis interface.
Don't forget the G43. > If I run a program with G41 it does pick up cutter comp, now if I open the > tool table from within the Axis interface and change the diameter of Tool 1 > to D.01 it does write that information to the ppmc.tbl file. I find the tool table editor box to be a bit counterintuitive. You need to press the "write" button, then close the editor, or you end up with several editor boxes in the background. When you select "edit tool table" you seem to get another instance of the tool table editor, not the existing one brought to the foreground. This might be version-dependent, and I am not sure which version my machine is on (it's a semi-random build from source) -- atp "Torque wrenches are for the obedience of fools and the guidance of wise men" ------------------------------------------------------------------------------ The demand for IT networking professionals continues to grow, and the demand for specialized networking skills is growing even more rapidly. Take a complimentary Learning@Cisco Self-Assessment and learn about Cisco certifications, training, and career opportunities. http://p.sf.net/sfu/cisco-dev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
