On mine, I simply pushed the Switching to EMC. Toggling F2 enables and disables the ICR. When running, all axes are enabled. Not perfect but it works for me.
On Mon, Sep 12, 2011 at 9:26 PM, Jon Elson <[email protected]> wrote: > BRIAN GLACKIN wrote: > > John, > > > > I am certainly no expert and defer to your expertise. I did not mean to > > imply that the motor lost steps, but meant it never received the step > since > > it was consumed powering up the driver. > If this is so, then that drive has a massive design defect, and the idle > current reduction feature > is hopelessly flawed, as it will lose steps somewhat unpredictably with > practically every CNC > software out there. How can the CNC program know when the drive has > powered down, so > it can issue an extra "wake up" step? The old Gecko drives has a > one-shot that would set the > drive back to full current within microseconds of the leading edge of > the step pulse. > > Jon > > > ------------------------------------------------------------------------------ > BlackBerry® DevCon Americas, Oct. 18-20, San Francisco, CA > Learn about the latest advances in developing for the > BlackBerry® mobile platform with sessions, labs & more. > See new tools and technologies. Register for BlackBerry® DevCon today! > http://p.sf.net/sfu/rim-devcon-copy1 > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ BlackBerry® DevCon Americas, Oct. 18-20, San Francisco, CA Learn about the latest advances in developing for the BlackBerry® mobile platform with sessions, labs & more. See new tools and technologies. Register for BlackBerry® DevCon today! http://p.sf.net/sfu/rim-devcon-copy1 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
