That is the way my BP Discovery works. You press the Oh Shit button and all motion stops but the spindle keeps turning and coolant keep flowing. You press the spindle up button and the spindle moves to the "clear" position. Then you can press the spindle stop button and the spindle and coolant stop...
Seems logical (to this hillneck) that kind of thing should be configurable by the integrator to some degree. John the top poster Farzin Kamangar wrote: > Dear EMC users, > I was asked to make the following change in the controller behaviour. > As you know when we want to stop the running program and we push the stop > program button, program stops and > so does spindle from turning. Now the request is: when we stop the program > by pressing the stop program button, we want the spindle to keep on turning > if it was turning before pressing the > stop program button. What do you think? This is because they do not want the > tool in spindle to get stuck in the workpiece when we stop the program. We > stop spindle by pressing spindle > off button or by entering M5 in MDI later. Thanks > Farzin > ------------------------------------------------------------------------------ > The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: > Pinpoint memory and threading errors before they happen. > Find and fix more than 250 security defects in the development cycle. > Locate bottlenecks in serial and parallel code that limit performance. > http://p.sf.net/sfu/intel-dev2devfeb > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: Pinpoint memory and threading errors before they happen. Find and fix more than 250 security defects in the development cycle. Locate bottlenecks in serial and parallel code that limit performance. http://p.sf.net/sfu/intel-dev2devfeb _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
