hi, follow these instructions: http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Installing_EMC2#Building_emc2_realtime
regards, Michael Viesturs Lācis pisze: > Hello! > > I have 2 questions about EMC2, I hope that somebody can point me into > some useful direction. > 1) Is there a way to update from 2.4.0 to 2.4.1 on Lucid? > > 2) I have been trying to compile EMC2 on Lucid without any success. > > What I did: > Acquired EMC2 source by executing: > git clone git://git.linuxcnc.org/git/emc2.git emc2-dev > > VERSION file says that I have got source of EMC 2.5~pre. > > Then I opened README file and tried to follow instructions: > cd /home/waterjet/emc2-dev/src > ./configure --enable-run-in-place > > And for last command I get: > bash: ./configure: No such file or directory > > Andy suggested this command to get additional packages installed: > sudo apt-get install build-essential fakeroot debhelper libpth-dev > libgtk2.0-dev kernel-wedge tcl8.4-dev tk8.4-dev bwidget python2.5-dev > python-tk python-dev libglu1-mesa-dev libgtk2.0-dev > libgnomeprintui2.2-dev libncurses5-dev libxaw7-dev gettext > libreadline5-dev lyx texlive-extra-utils imagemagick tetex-bin > tetex-extra groff qt3-dev-tools > sudo apt-get install build-essential fakeroot debhelper libpth-dev > libgtk2.0-dev kernel-wedge tcl8.4-dev tk8.4-dev bwidget python2.5-dev > python-tk python-dev libglu1-mesa-dev libgtk2.0-dev > libgnomeprintui2.2-dev libncurses5-dev libxaw7-dev gettext > libreadline5-dev lyx texlive-extra-utils imagemagick tetex-bin > tetex-extra groff qt3-dev-toolssudo apt-get install build-essential > fakeroot debhelper libpth-dev > libgtk2.0-dev kernel-wedge tcl8.4-dev tk8.4-dev bwidget python2.5-dev > python-tk python-dev libglu1-mesa-dev libgtk2.0-dev > libgnomeprintui2.2-dev libncurses5-dev libxaw7-dev gettext > libreadline5-dev lyx texlive-extra-utils imagemagick tetex-bin > tetex-extra groff qt3-dev-tools > > For several packages I got answer that they do not exist: I remember > lyx, tetex-extra. > For several packages I got answer that I should choose another one, > which is equivalent, for example instead of python2.5-dev I should > install python-old-doctools, but there were few more. > > What am I missing here? I suspect that it is some very basic mistake, > as I do not yet have any experience with compiling and building > applications in Linux. > > with best regards, > Viesturs > > ------------------------------------------------------------------------------ > This SF.net email is sponsored by Sprint > What will you do first with EVO, the first 4G phone? > Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > > > ------------------------------------------------------------------------------ This SF.net email is sponsored by Sprint What will you do first with EVO, the first 4G phone? Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
